1C.F5.230-0008 KEB
Wake Industrial LLC is not an authorized distributor of this product.
The KEB 1C.F5.230-0008 is part of the F5 Combivert Axis Drives series and supports 2 analog inputs and 2 analog outputs, as well as 8 digital inputs. It features 29 control terminals, a maximum output frequency of 1600 Hz, and comes with installed accessories such as a braking transistor and EMI filter. This drive also provides two relay outputs and supports PNP/NPN switchable logic.
Internal Product Review
The 1C.F5.230-0008 is a KEB Combivert F5 axis drive with an integrated braking transistor and EMI filter, making cabinet integration especially clean and practical. A 2 ms I/O scan time paired with a 1600 Hz maximum output frequency gives this unit sharp response and strong flexibility for demanding motion applications.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The 1C.F5.230-0008 is a motor control unit manufactured by KEB within the F5 Combivert Axis Drives series. Serving as an axis drive, it converts three-phase mains power into a variable-frequency, variable-voltage output so that industrial controllers can execute precise speed and position commands on connected motors. The module is intended for automation tasks such as conveyors, packaging stations, or pick-and-place axes where compact, menu-driven frequency inverters simplify cabinet integration. It can be used wherever a controller must regulate acceleration, running speed, and stopping behavior with consistent timing. This makes it suitable for machines that alternate between steady transport motion and short positioning moves.
The drive provides 2 analog inputs, and each one is software-selectable for 0…10 V, ±10 V, 0/4…20 mA signaling, allowing either speed reference voltages or process-loop currents to be accepted without external converters. Field wiring lands on 29 control terminals, so separate enable, fault reset, and setpoint lines can be kept apart from power conductors. Machine sensors connect to 8 digital inputs that use a 2 ms I/O scan time, giving the drive predictable response to limit switches and stop commands. For fast spindle or servo applications, the inverter supports a 1600 Hz max output frequency, while a pair of analog outputs and dual relay contacts can report actual current, speed, or status data to a supervisory PLC. This arrangement lets control signals, interlocks, and status feedback be routed cleanly inside compact panels.
Application data is organized in 8 parameter sets, so different machine formats can use stored tuning profiles and switch between them without reprogramming the drive. The internal control board supports PNP/NPN switchable logic, which allows the unit to adapt to existing wiring conventions. A factory-installed braking transistor and EMI filter are built into the housing to dissipate regenerative energy and reduce conducted noise. The same assembly also includes two transistor outputs, two software I/O points, and a 250 Hz counter input for encoder marker pulses or part counts. That combination supports flexible control layouts without requiring external add-on modules for basic interface tasks.
