19.F5.C0H-Y02A KEB
Wake Industrial LLC is not an authorized distributor of this product.
The KEB 19.F5.C0H-Y02A is an axis drive from the F5 Combivert Axis Drives series with a general maximum motor power of 40 horsepower and a voltage class of 400 V. The device offers 8 digital inputs, 2 analog inputs, and supports both resolver and incremental encoder interfaces. It features an IP20 enclosure and measures 340 mm in height, 297 mm in width, and 255 mm in depth.
Internal Product Review
The 19.F5.C0H-Y02A is a KEB F5 Combivert axis drive with a 400 V class rating and 40 HP motor capacity. A 2 ms control scan time and resolver/incremental encoder interface support responsive, accurate drive control. IP20 enclosure protection makes the unit a strong choice for controlled cabinet installations.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The 19.F5.C0H-Y02A is an AC axis drive inverter produced by KEB for the F5 Combivert Axis Drives series. The unit converts fixed-frequency three-phase input into variable voltage and frequency output so asynchronous or synchronous motors can run with programmable speed and torque profiles in automated machinery, conveyors, and processing lines. Integrated control logic and fieldbus options let the drive coordinate with PLCs for closed-loop motion and energy-saving motor management. This model is intended for mid-range motor control duties in industrial equipment.
The voltage system is rated at 400 V, matching standard three-phase mains in industrial plants. A peak output of 40 HP is available for compatible applications, while the internal IGBT stage switches at 2 kHz to shape the output waveform. The digital signal processor refreshes regulation loops every 2 ms, so speed corrections are applied quickly. Its enclosure carries an IP20 rating, so it is intended for cabinet mounting in controlled environments. Eight digital inputs, two relay contacts, two transistor outputs, and four software-assignable I/O points support flexible control sequencing. Two analog inputs and two analog outputs accommodate setpoint, feedback, or sensor scaling, while the resolver and incremental encoder interface supplies real-time shaft position to the control core.
The drive trips on overcurrent at 150% of rated output and can sustain a short-time current of 125% to handle acceleration peaks before shutdown logic intervenes. Its housing follows form factor code H and inverter size code 19. The enclosure stands 340 mm high, measures 297 mm wide, and extends 255 mm in depth, so a single column in a standard 600 mm cabinet is usually sufficient. All terminations are located on the front, allowing service access without disconnecting field wiring.
