Product Description:

The 19.F5.C0H-350F is an axis drive manufactured by KEB and supplied within the F5 Combivert Axis Drives series. As an adjustable-frequency inverter, it links the motion controller to the motor and modulates voltage and frequency so factory equipment can accelerate, decelerate, or hold speed with precision. It is suited for applications that need controlled motor operation rather than simple across-the-line starting, and it can be used with both induction and synchronous machines. By varying output to match the commanded operating point, the drive supports steady speed control during changing load conditions.

This model delivers a continuous output of 40 HP, allowing it to run medium-sized motors in conveyor, pump, or spindle applications. Its auxiliary signal output follows the TTL standard, which provides clear 5 V logic levels for status, fault, ready, or reference signals. Closed-loop regulation is handled through a built-in encoder port that supports Hiperface, enabling absolute position feedback. That feedback path allows the drive to compare commanded and actual motion during regulated operation. When connected to a three-phase 230 V supply, the drive maintains the same stated horsepower ceiling under the listed rating.

The housing form factor is identified by the letter H, which marks the frame arrangement used for mounting and airflow in this series. The inverter size identifier is 19, and that code corresponds to the physical size needed for the drive's thermal capacity and terminal layout. Within the Combivert F5 product line, the unit is categorized as Unit B, a designation used for the clearance distances and cable entry arrangement associated with this build. These coded elements in the model number indicate the enclosure style and rating class without adding separate naming elsewhere in the part number.