19.F5.A1H-35GA KEB
Wake Industrial LLC is not an authorized distributor of this product.
The KEB 19.F5.A1H-35GA is part of the F5 Combivert Axis Drives series and features a standard control board and a braking transistor accessory. This drive supports a maximum motor power of 40 horsepower at 230V and comes in housing form factor H with an inverter size code of 19.
Internal Product Review
The 19.F5.A1H-35GA is a KEB Combivert F5 axis drive featuring a standard control board and an installed braking transistor. Rated for 40 HP in 230V Unit B applications, the drive stands out as a capable and well-balanced choice for demanding axis control.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The 19.F5.A1H-35GA axis drive is manufactured by KEB and belongs to the F5 Combivert Axis Drives series. It functions as a variable-frequency inverter that supplies regulated three-phase output for controlling motor speed and torque. The drive is suitable for automated machinery such as conveyors, forming lines, pumps, extruders, and material-handling stations. By converting fixed mains power into a modulated output, the unit follows motion commands from PLCs or stand-alone controllers while helping protect connected motors from overload.
Internal control functions are handled by the Standard Board, which provides parameter memory, analog reference inputs, and fieldbus connectivity without requiring an additional control card. The inverter supports up to 40 HP of motor power when operated from an industrial 230 V supply. This power capacity supports applications that require controlled acceleration, stable running speed, and repeatable torque response under changing loads. A factory-installed braking transistor controls the transfer of regenerated energy to a connected external braking resistor during rapid deceleration. The 19 size code indicates the power-section format, heat sink arrangement, and terminal spacing used for this model within the F5 platform.
The housing uses form factor code H, which establishes an enclosure profile suited to 300-mm-wide control panels. Side cooling fins support airflow around the heat sink when several components are installed in the same cabinet. The shared keypad layout and diagnostic menus allow the drive to use the same operating approach as related Combivert F5 units. Its control architecture supports coordinated speed and torque regulation for machinery that must maintain consistent cycle timing during acceleration, steady operation, and controlled stopping.
