17.F5.CBG-YM00 KEB
Wake Industrial LLC is not an authorized distributor of this product.
The KEB 17.F5.CBG-YM00 is an axis drive from the F5 Combivert Axis Drives series designed for a maximum motor power of 25 HP and a rated output power of 29 kVA. It operates with a rated input voltage of 400 V, supports a maximum output frequency of 599 Hz, and provides a rated output current of 42 A. The unit features an integrated braking transistor, IP20 protection class, and supports a maximum short-time current of 63 A.
Internal Product Review
The 17.F5.CBG-YM00 is a KEB F5 Combivert axis drive with a 400 V rated input voltage and 42 A rated output current. An integrated braking transistor and 30 A max braking current make this unit especially appealing for controlled deceleration duties. IP20 protection and a 599 Hz max output frequency give the drive strong cabinet suitability and impressive application range.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The 17.F5.CBG-YM00 is an inverter drive manufactured by KEB and supplied within the F5 Combivert Axis Drives series. Designed to modulate three-phase induction motors in automated machinery, the unit converts the fixed 400 V mains supply into variable-voltage and variable-frequency output for speed and torque control. By integrating the control electronics, power stage, and an internal braking circuit in a compact frame, the drive provides centralized regulation of a single axis in packaging lines, material-handling systems, or process equipment.
The drive accepts a three-phase supply at 400 V and draws a continuous input current of 55 A under nominal load. At the output terminals, it delivers 42 A, corresponding to an apparent power of 29 kVA for motors rated up to 25 hp. Its IGBT bridge switches at 4 kHz, balancing thermal stress with acceptable acoustic noise. In constant-torque applications, the inverter can operate motors down to a minimum full-load frequency of 3 Hz without losing regulation. Short-circuit protection is provided by an overcurrent trip that activates when the phase current reaches 75 A. This protective response interrupts operation before excessive current can damage the inverter or connected motor.
The output frequency extends up to 599 Hz, allowing the drive to operate high-speed spindles or turbo blowers. During deceleration, an integrated transistor diverts energy into an external resistor; the circuit supports a peak braking current of 30 A when the resistor is at least 25 Ω. For rapid load changes, the power stage withstands a short-term output of 63 A before thermal limits require derating. The enclosure has an IP20 protection rating and therefore requires cabinet installation away from conductive dust. Because no encoder feedback card is fitted, the drive uses sensorless control by default. Housing code G and inverter size 17 indicate the mechanical dimensions used for installation.
