17.F5.A1G-35-A KEB
Wake Industrial LLC is not an authorized distributor of this product.
The KEB 17.F5.A1G-35-A is part of the F5 Combivert Axis Drives series and features a standard control board. It supports a maximum motor power of 25 HP at 230V and comes with a braking transistor as an installed accessory. The unit has a G form factor housing and an inverter size code of 17.
Internal Product Review
The 17.F5.A1G-35-A is a KEB Combivert F5 axis drive configured with a standard board and an integrated braking transistor. A 25 HP motor power rating and size 17 construction make the drive well suited for demanding motion-control applications with straightforward platform fitment. A strong choice for F5 systems, especially with the added braking transistor.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The 17.F5.A1G-35-A is an axis inverter produced by KEB for the F5 Combivert Axis Drives series. It is intended for multi-motor lines and single-spindle modules that require controlled motor operation. The unit converts fixed mains power into a regulated three-phase output for induction or synchronous motors. Commands from a programmable controller allow connected motors to start, stop, and operate within selected speed or torque limits, supporting coordinated movement in automated machinery.
Inside the inverter, a standard control board provides the basic I/O channels, encoder interfaces, and parameter memory needed for closed-loop operation. The general drive section supports up to 25 HP of motor power, allowing one unit to operate moderate conveyors, mixers, or positioning axes without parallel devices. The mechanical layout uses housing code G, which establishes the mounting-hole pattern, airflow direction, and overall depth needed for cabinet placement. During rapid deceleration, an integrated braking transistor transfers regenerated energy to an external resistor block and helps prevent excessive DC-bus voltage. The electrical and thermal limits correspond to inverter size 17, which establishes the applicable current capacity, bus capacitance, heat-sink area, and cooling requirements for the frame.
The inverter operates from a three-phase 230 V supply and reaches its full output in the configuration identified as Unit B. This voltage class provides the stated power capability without requiring equipment intended for a higher supply voltage. Diagnostic menus in the Combivert F5 control system provide access to brake-chopper duty cycles and heat-sink temperature, allowing operating conditions to be monitored during acceleration and deceleration. A proprietary service cable supports parameter transfer between the inverter and compatible control equipment without altering the power connections. Adjustable drive parameters allow the axis response to be matched to the connected motor and load while keeping operation within the thermal limits of the size-17 platform.
