16.F5.A1G-Y0BA KEB
Wake Industrial LLC is not an authorized distributor of this product.
The KEB 16.F5.A1G-Y0BA is an axis drive from the F5 Combivert Axis Drives series and features a standard control board and inverter size code 16. It supports a maximum motor power of 20 HP at 230V and includes a braking transistor as an installed accessory. The unit is equipped with an LCD operator interface that supports Serial and CAN communication.
Internal Product Review
The 16.F5.A1G-Y0BA is a KEB Combivert F5 axis drive built with a standard control board and an integrated braking transistor. The LCD operator with Serial/CAN support streamlines setup, and the 20 HP motor rating makes this unit an excellent choice for capable motion control.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The 16.F5.A1G-Y0BA is an AC axis drive manufactured by KEB for the F5 Combivert Axis Drives series. This unit functions as a variable-frequency inverter that modulates three-phase output to match commanded torque and speed, allowing automation controllers to operate induction or synchronous motors without mechanical gear changes. By integrating with motion bus networks, the drive can serve conveyors, packaging stations, and positioning equipment that require dynamic regulation and controlled deceleration. Its inverter stage converts incoming power into an adjustable output waveform that supports precise motor control under changing load conditions.
The drive is equipped with a Standard Board control card, providing standard I/O channels for reference signals, encoder feedback, and fieldbus expansion. Its continuous output capability supports motors up to 20 HP when the mains supply is in the 400 V class, providing suitable capacity for midsize pumps, extruders, and automated machinery. The mechanical layout uses housing form factor code G, so the heat sink, terminal spacing, and mounting holes follow the arrangement used for the corresponding frame. A factory-installed braking transistor allows excess regenerative energy to be directed to an external resistor, preventing DC-link overvoltage during rapid deceleration. Inverter size code 16 indicates the current capacity, cooling requirements, and short-circuit withstand characteristics associated with this model.
User interaction is handled by the front-mounted LCD operator with Serial/CAN, which provides parameter entry through soft keys and displays live operating status through the diagnostic interface. The unit conforms to Variant B, with component placement and connector orientation following the corresponding B-level arrangement for consistent cabinet wiring. Within the Combivert F5 platform, the drive supports vector control, motor autotuning, and available safe-torque-off functions. The serial and CAN connections support communication with compatible control equipment, while the display provides direct access to operating values, fault messages, and adjustable drive parameters.
