15.F5.MBE-YUZY KEB
Wake Industrial LLC is not an authorized distributor of this product.
The KEB 15.F5.MBE-YUZY is part of the F5 Combivert Axis Drives series and supports a nominal input voltage of 400 VAC with three input phases. It delivers up to 15 HP of motor power, a rated output current of 24 Amps, and has a protection rating of IP20. The drive allows for a maximum switching frequency of 16 kHz and a peak current of 36 Amps for 30 seconds.
Internal Product Review
The 15.F5.MBE-YUZY is a KEB F5 Combivert axis drive designed for 3-phase systems at 400 VAC. Rated output current of 24 A and output apparent power of 17 kVA support stable performance on demanding motor loads. IP20 protection and switching capability up to 16 kHz make the unit an excellent choice for clean cabinet installations requiring responsive control.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The 15.F5.MBE-YUZY is an AC axis drive built by KEB as part of the F5 Combivert Axis Drives series. Supplied in the E housing form factor with size code 15, the unit controls induction or synchronous motors up to 15 HP and accepts a three-phase power feed. Within multi-axis machinery, the drive modulates DC-bus energy so a connected motor follows velocity or torque commands without external contactors. This arrangement is useful in cabinet-installed motion systems where the drive must regulate motor response from a compact inverter section.
The inverter operates from a nominal line of 400 VAC and draws a rated current of 31 A. Its output bridge supplies 24 A, giving an apparent power of 17 kVA at the motor terminals. IGBT devices commutate at a standard frequency of 4 kHz, while an overcurrent trip is set at 43.2 A to protect the power stage during faults. When fed from 230 V in the B configuration, the maximum motor power remains 15 HP. A minimum braking resistor of 36 Ω must be fitted so regenerated energy is dissipated safely, and shielded motor leads up to 330 ft can be routed without exceeding the drive's EMC limits. Motor and line lugs are tightened to 11 in-lb so thermal cycling does not loosen conductors.
During short acceleration intervals, the current may rise to 36 A for 30 s, and the integral chopper can sink a braking current of 21 A provided the external resistor meets the required impedance. For applications that demand lower audible noise or higher control bandwidth, the switching frequency can be increased to 16 kHz. The enclosure carries an IP20 rating, so the drive must be mounted inside a cabinet where dust and moisture are controlled. This cabinet-mounted arrangement is appropriate for conveyors, winders, and coordinated servo axes that use external braking hardware.
