15.F5.M1E-YU01 KEB
Wake Industrial LLC is not an authorized distributor of this product.
The KEB 15.F5.M1E-YU01 is part of the F5 Combivert Axis Drives series and supports a maximum motor power of 15 HP at 400 V for three-phase asynchronous motors. This model features 2 analog inputs with 12-bit resolution, 8 digital inputs, and 2 encoder inputs, along with a field-oriented motor control type. It includes 29 control terminals, pluggable terminals, an external 24 V supply, and an integrated braking transistor.
Internal Product Review
The 15.F5.M1E-YU01 is a KEB F5 Combivert axis drive built for three-phase asynchronous motors on a 400 V platform. Field-oriented motor control and a 1 ms I/O scan time support precise response and dependable machine integration. An installed braking transistor adds useful motion control capability, and the 15 HP motor rating stands out for demanding axis applications.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The 15.F5.M1E-YU01 is an AC axis drive produced by KEB within the F5 Combivert Axis Drives series. Intended for panel-mounted installation, this inverter supplies closed-loop speed and torque regulation for three-phase asynchronous motors used in conveyors, pumps, and coordinated machine axes. In an automation cell, the unit converts fixed mains input into a variable output while exchanging real-time status data with the PLC, allowing synchronized motion and energy-efficient operation. It is suited for control systems where motor speed must follow process commands rather than fixed supply conditions.
The control layer includes 29 spring-clamp terminals on pluggable blocks for fast wiring. Two analog channels with 12-bit resolution accept speed or torque references, and 8 opto-isolated digital inputs capture commands within the programmed scan time of 1 ms. Dual encoder ports support incremental or absolute feedback so the Multi control mode can shift between position, velocity, and torque loops. This mix of command inputs and feedback channels allows the drive to support both simple speed tasks and coordinated axis functions. Opto-isolation helps separate field signals from the drive electronics. An external 24 V circuit powers the control board, maintaining communication during mains dropouts. The inverter accommodates motors up to 15 HP.
The power section is rated for 400 V mains and corresponds to inverter size code 15 with housing form factor E. A factory-installed braking transistor manages regenerated energy during rapid deceleration, protecting the DC link and external resistors. Torque production relies on the field-oriented algorithm, delivering precise control of the connected three-phase asynchronous motor. This control method helps the inverter regulate motor response during load changes and low-speed operation. For auxiliary actuators, an onboard relay switches up to 30 VDC / 1 A. The relay can be used for status signaling or simple external device control. Pluggable output blocks simplify wiring, and the control board is supplied exclusively from the external source so communication can remain active during startup, emergency stops, and faults.
