15.F5.A1G-L6DA KEB
Wake Industrial LLC is not an authorized distributor of this product.
The KEB 15.F5.A1G-L6DA is a drive from the F5 Combivert Axis Drives series. It features a standard control board and supports a maximum motor power of 15 horsepower at 230V. The drive includes a braking transistor and an LCD operator interface with Serial and CAN connections.
Internal Product Review
The 15.F5.A1G-L6DA is a KEB Combivert F5 axis drive rated for 15 HP with a standard control board. An LCD operator with Serial/CAN support streamlines commissioning, while the integrated braking transistor adds valuable deceleration control. A well-configured drive for dependable motion performance in industrial systems.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The 15.F5.A1G-L6DA is an AC axis drive manufactured by KEB within the F5 Combivert Axis Drives series. It operates as a variable-frequency inverter that converts fixed mains power into a controllable three-phase output. This output allows synchronous or induction motors to be matched closely to load requirements on conveyors, winders, and positioning stations throughout automated production lines. The drive regulates motor speed and torque to support controlled acceleration, steady operation, and deceleration in machinery with changing load demands.
This model is rated for a continuous mechanical output of 15 HP, enabling it to operate midsize production motors without derating under appropriate operating conditions. Control functions are processed on a standard board, which supplies the basic speed- and torque-regulation algorithms used by the platform. A factory-installed braking transistor allows regenerated energy to be diverted to an external resistor during rapid deceleration. Front-panel interaction is handled by the LCD operator with Serial/CAN communication and a peak output feature. The keypad displays operating values and transfers parameters to higher-level controllers through either supported interface. The mechanical layout uses the G housing form factor, which provides a consistent enclosure width and cooling-air path for installation in a drive cabinet. This housing arrangement also establishes the physical space needed for power connections, control wiring, and ventilation around the unit.
The unit uses Variant D, which includes the terminal style and protective coating options selected for this configuration. Its power section carries size code 15, matching its current capacity to the 400 V mains class supported by the product line. Within system documentation, the drive is grouped under the Combivert F5 designation, allowing compatible accessories and parameter structures to be selected for the axis. Serial and CAN communication provide two practical paths for exchanging operating data with an external controller. Regenerated energy must be routed through a suitable external resistor connected to the installed braking circuit, particularly when the application includes frequent or abrupt stops.
