15.F5.MBE-YUZF KEB
Wake Industrial LLC is not an authorized distributor of this product.
The KEB 15.F5.MBE-YUZF is part of the F5 Combivert Axis Drives series and supports a maximum motor power of 15 HP at 230V. It features 5 digital inputs of PNP type, 2 digital outputs, 1 analog input with 11-bit resolution, and 2 encoder inputs supporting the Hiperface interface. The device operates with a peak current of 36 A and a rated current of 24 A, and provides a 24 V DC external control supply.
Internal Product Review
The 15.F5.MBE-YUZF from the Combivert F5 series by KEB is a high-performance axis drive supporting up to 15 HP motor power and a peak current of 36 A. With dual encoder inputs and a Hiperface interface, this unit is well-suited for precise motor control applications. The 11-bit analog input resolution and five digital inputs make it a versatile choice for demanding automation environments.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The 15.F5.MBE-YUZF is a drive controller manufactured by KEB within the F5 Combivert Axis Drives series. It regulates three-phase induction or synchronous motors used in automation lines where coordinated speed, torque, and position have to be maintained for each axis. The controller is suited for motion tasks that need repeatable response during changing loads and commanded speed profiles. Its role is to convert control commands into regulated motor output while supporting closed-loop operation in compact drive cabinets.
The unit offers one analog input with 11 bit resolution, letting the control loop accept finely scaled setpoints, and a single analog output for real-time feedback. The controller recognizes edge transitions on its 5 digital inputs, which use a PNP sourcing scheme for start, stop, or mode selection. An auxiliary pulse train is provided through a TTL-level connector for speed reference. All logic circuitry is powered from a separate 24 V DC external supply so signal power remains isolated from the main inverter bus. Short acceleration bursts are handled by a peak output of 36 A, while seventeen numbered control terminals provide fixed connection points for sensors, potentiometers, and safety loops. Two encoder feedback ports accept incremental or absolute signals, allowing closed-loop vector or servo operation.
A continuous current limit of 24 A aligns the inverter with motors up to 15 HP on a 230 V supply, matching the 15 designation in the size code. Closed-loop performance benefits from the integrated Hiperface interface, which occupies one of the two feedback sockets and streams absolute position data directly to the processor. For external signaling, the device includes 1 relay output whose changeover contacts can forward fault or ready states to higher-level circuits. The housing follows form factor E, keeping the footprint consistent with other Combivert F5 modules, and the removable terminal block simplifies panel maintenance while reducing enclosure wiring density.
