15.F5.24E-0409 KEB
Wake Industrial LLC is not an authorized distributor of this product.
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
The KEB 15.F5.24E-0409 belongs to the F5 Combivert Axis Drives series and features a rated current of 24 Amps with support for input voltages of 400 Volts in a 3-phase configuration. This drive provides fault monitoring for short-circuit and earth fault, has an enclosure rating of IP20, and supports an operating temperature range from -10 to 45 degrees Celsius. It offers a maximum motor power of 15 HP and features a UVW encoder interface and TTL auxiliary signal output.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The 15.F5.24E-0409 is an axis inverter produced by KEB within the F5 Combivert Axis Drives series. With inverter size code 15 and housing form factor E, the unit is intended to regulate asynchronous or synchronous motors up to 15 HP on individual motion axes. By modulating the supply frequency and voltage, it provides speed and torque control for packaging, material-handling, and processing equipment. This arrangement lets one drive handle acceleration, deceleration, and steady-state speed control on standalone machine axes. Its role in automation is to convert fixed-frequency plant power into the variable output required for closed-loop motor control through the drive’s embedded current and position algorithms.
On the power input, the drive accepts a three-phase mains supply in the 400 V class, matching common industrial networks. The control board routes edge-triggered diagnostic pulses through a TTL auxiliary signal output for synchronized feedback devices. Motor position data is received over a UVW incremental encoder interface, allowing direct commutation without additional adapter cards. This feedback arrangement supports rotor-angle tracking during electronic commutation and helps the inverter maintain stable motor control across changing loads. Switching elements operate at up to 16 kHz carrier frequency, which supports low-ripple torque in high-speed applications, while the standard carrier setting reduces switching losses during normal duty. The housing is rated to IP20, so the inverter must be installed inside a cabinet, and built-in short-circuit and earth-fault monitoring isolates the unit within microseconds when line or load faults are detected.
The inverter meets C1 electromagnetic compatibility requirements, which helps limit interference in cabinet installations that route power and signal wiring in the same enclosure. During continuous duty, the semiconductor bridges deliver 24 A, balancing acoustic noise and thermal loading at the standard carrier setting. Ambient service limits from -10 to 45 °C preserve component life when the drive is mounted in a forced-ventilated enclosure. Storage temperatures from -25 to 70 °C allow the unit to be kept in inventory without climate-controlled storage.
Frequently Asked Questions about 15.F5.24E-0409:
Q: What is the maximum motor power supported by the 15.F5.24E-0409 drive?
A: The Combivert F5 15.F5.24E-0409 drive supports a maximum motor power of 15 HP.
Q: What input voltage and phase does the 15.F5.24E-0409 require?
A: This model operates on a 3-phase input voltage with a voltage class of 400 V.
Q: What fault monitoring features are provided on the 15.F5.24E-0409 drive?
A: The 15.F5.24E-0409 inverter features short-circuit and earth fault monitoring for enhanced safety.
Q: What EMC class is assigned to the 15.F5.24E-0409 drive?
A: It offers an EMC Class C1 rating, making it suitable for use in environments with stringent electromagnetic compatibility requirements.
Q: What is the enclosure protection rating of the 15.F5.24E-0409 drive?
A: The enclosure is rated at IP20, providing basic protection against solid objects but no protection against liquids.
