14.F5.MBE-LAEA KEB
Wake Industrial LLC is not an authorized distributor of this product.
MPN:
The KEB 14.F5.MBE-LAEA is part of the F5 Combivert Axis Drives series and supports a maximum motor power of 10 horsepower for 3-phase asynchronous motors. It features a regulated design with a D-Sub 15-pole resolver encoder and a D-Sub 9-pole TTL output encoder.
Internal Product Review
The 14.F5.MBE-LAEA is a KEB Combivert F5 regulated axis drive for 3-phase asynchronous motors. Resolver and TTL output feedback support gives the drive useful flexibility for encoder integration in motion applications. A 10 HP motor power rating makes the package especially appealing for capable mid-range axis control.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The 14.F5.MBE-LAEA axis drive is produced by KEB and belongs to the F5 Combivert Axis Drives series. It interfaces between the plant's mains supply and servo or induction motors, providing vector-controlled output for precise positioning and speed regulation. In automated cells, it acts as a central power stage that converts fixed-frequency input into variable-frequency, variable-voltage output. This allows the connected motor to accelerate, decelerate, and maintain commanded speed according to programmed motion profiles. Because output parameters are controlled electronically, the drive can support both repeatable axis movement and steady process operation in conveyor, handling, and general machine applications.
Encoder feedback hardware is integrated on the front panel, which keeps signal connections close to the control electronics. The primary feedback port uses a 15-pole D-Sub connector and accepts a resolver, allowing rotor position feedback even at zero speed. This arrangement supports stable feedback during startup and low-speed operation. On a 230 V supply, the inverter can energize motors up to 10 HP. Mechanical packaging follows Housing Form Factor code E, so the enclosure uses the matching cabinet footprint and mounting pattern for that size. The power stage is tuned for a three-phase asynchronous motor used in standard industrial induction applications.
Secondary feedback is available for high-speed synchronization where pulse-based position tracking is preferred. A dedicated port with a 9-pole D-Sub connector handles incremental signals from encoders that deliver a TTL output, giving phase-accurate pulse trains to the control board. Incremental feedback is useful when the machine requires fast pulse evaluation during synchronized motion. The inverter size code is 14, which corresponds to the heat-sink mass and semiconductor rating needed to sustain peak currents without additional cooling accessories. Control loops inside the unit remain regulated, so voltage and frequency deviations under load stay within tight limits when the module drives fans, pumps, or indexing axes. This helps the inverter respond consistently when load conditions change during normal operation.
