14.F5.M1E-3AG0 KEB
Wake Industrial LLC is not an authorized distributor of this product.
The KEB 14.F5.M1E-3AG0 is an axis drive from the F5 Combivert Axis Drives series with a maximum motor power of 10 HP at 230V. It features inverter size code 14, form factor code E, and comes equipped with a braking transistor accessory but no encoder feedback card.
Internal Product Review
The 14.F5.M1E-3AG0 is a KEB Combivert F5 axis drive rated for 10 HP at 230 V. An installed braking transistor adds effective deceleration control, and the size 14 platform supports clean cabinet integration. The no-encoder configuration suits dependable open-loop applications and makes the unit a strong choice for streamlined motion systems.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The 14.F5.M1E-3AG0 axis inverter is produced by KEB as part of the F5 Combivert Axis Drives series. It modulates the voltage and frequency supplied to an AC motor, allowing speed and torque control across production lines and material-handling equipment. Installed as a dedicated power stage, the drive converts fixed-frequency mains power into regulated three-phase output for automated machinery. This arrangement lets higher-level control hardware vary motor behavior without changing the incoming supply characteristics, which supports repeatable motion in automated stations.
Its physical configuration uses inverter size code 14, which sets the heat-sink footprint and the wiring cross-sections accepted by the terminals. The drive is supplied in the slim E housing form factor, so it occupies minimal panel depth while still supporting natural convection airflow. For controlled energy dissipation during rapid deceleration, the unit includes a built-in braking transistor, which removes the need for an external chopper module on moderate-inertia loads. Feedback components are absent, and the drive comes with no encoder feedback card, making it suitable for V/Hz or open-loop vector operation that monitors current rather than rotor position. The compact enclosure also helps when cabinet space is limited and passive cooling must be maintained around adjacent components.
The drive’s continuous output limit is rated at 10 hp when it is powered from a three-phase 230 V supply. This output corresponds to the Unit B performance class, so the drive can be matched to pumps, conveyors, or small extruders within that power range without oversizing the installation. By pairing the internal chopper path with an appropriately sized braking resistor, the axis can dissipate surplus kinetic energy during deceleration without thermal derating. The internal braking path is useful in repeated start-stop motion where stopping energy must be controlled without adding a separate chopper stage. Thermistor monitoring, mains fusing, and fieldbus options in the F5 family can be added later without mechanical modifications.
