14.F5.M1E-3ADA KEB
Wake Industrial LLC is not an authorized distributor of this product.
The KEB 14.F5.M1E-3ADA is part of the F5 Combivert Axis Drives series and is designed for a maximum motor power of 10 HP. This drive features an LCD operator interface with Serial and CAN connectivity, and comes equipped with a braking transistor as an installed accessory.
Internal Product Review
The 14.F5.M1E-3ADA is a KEB Combivert F5 axis drive built for 10 HP motor applications. An integrated braking transistor and an LCD operator with Serial/CAN support make the drive a practical, high-performing choice for responsive axis control.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The 14.F5.M1E-3ADA is an AC inverter drive produced by KEB and assigned to the F5 Combivert Axis Drives series. In an automation cell, it regulates induction or synchronous motors up to their specified horsepower, performs vector control routines, and exchanges process data through the interface panel. This drive is used as the axis-level power stage in material-handling, packaging, or forming equipment where closed-loop speed and torque control are required. Its control functions let the connected machine coordinate motor response with changing load and motion commands during operation.
The general power ceiling is 10 HP, and the same limit applies when the unit operates on a 230 V supply, so sizing calculations remain consistent across those conditions. Size code 14 identifies the frame dimensions and cooling surfaces that dissipate switching heat generated by the IGBTs. A factory-installed braking transistor routes regenerated energy into an external resistor, preventing uncontrolled DC bus rise during rapid deceleration. The front panel includes the LCD Operator with Serial/CAN + peak output feature. This display shows real-time current peaks and allows parameter changes without a PC. Housing form factor code E indicates a cabinet-mount enclosure with a rear heat sink extrusion so airflow can be directed through a duct or plenum.
Variant D indicates the internal option set, including relay outputs and encoder supply terminals suited to encoder-based feedback loops. The drive belongs to the F5 Combivert Axis Drives series and uses the control structure associated with that line. The Unit B designation refers to the mechanical arrangement around the DC bus section, allowing the frame to accept larger filter capacitors when higher ripple current capability is needed. This arrangement helps the drive fit multi-axis equipment that requires controlled braking behavior and consistent electrical layout.
