14.F5.C1D-380A KEB
Wake Industrial LLC is not an authorized distributor of this product.
The KEB 14.F5.C1D-380A is part of the F5 Combivert Axis Drives series and supports a rated voltage of 400 V AC along with a rated output current of 16.5 Amps. This drive has a general maximum motor power of 10 horsepower and a rated apparent power of 11 kVA. It features a braking transistor as an installed accessory and has a switching frequency range from 2 to 16 kHz.
Internal Product Review
The 14.F5.C1D-380A is a KEB F5 Combivert axis drive rated for 400 V AC with 11 kVA apparent power. A 16.5 A rated output current and 10 HP motor capacity give this unit strong control authority for mid-range motion applications. The integrated braking transistor adds practical value for controlled deceleration, making this drive a well-balanced choice for demanding machine axis service.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The 14.F5.C1D-380A is an AC axis drive manufactured by KEB as part of the F5 Combivert Axis Drives series. The unit operates as a field-oriented inverter that conditions the fixed AC supply and delivers variable voltage and frequency to a connected motor. In automated conveyor lines, packaging stations, or process pumps, the drive supplies the commanded torque profile while also passing diagnostic and status signals to the supervisory controller. Its design follows the modular structure used across the Combivert platform, allowing standardized wiring and parameter sets to be used across multiple axes.
Control references enter through Analog Input 1, which accepts 0…±10 VDC, while the six opto-isolated control terminals recognize logic levels between 13…30 VDC. The drive electronics can be powered by an external 24 V rail, with a specified supply window of 20–30 VDC at 1 A. Internally, a 650 µF DC-link capacitor smooths the rectified bus that is fed from the plant's 400 V AC supply. Under rated conditions, the output section delivers 16.5 A, corresponding to 11 kVA of apparent power, and it can be modulated at carrier frequencies selectable from a nominal 2 kHz up to 2/16 kHz. These electrical limits affect thermal loading, acoustic noise, and the dynamic bandwidth available to the closed-loop motor control.
The power stage is sized for machines that need as much as 10 HP of shaft output, and that limit also applies when the same frame is operated from 230 V on Unit B connections. During rapid deceleration, the integrated braking transistor diverts excess energy to an external resistor, preventing overvoltage trips in the shared intermediate circuit. Programmable relay contacts rated at 30 VDC / 1 A provide galvanically isolated status feedback to safety interlocks or PLC inputs. Mechanical interchangeability inside a cabinet is aided by housing code 14, which matches the outline and drilling pattern used for this inverter size.
