14.F5.B1E-3A0D KEB
Wake Industrial LLC is not an authorized distributor of this product.
The KEB 14.F5.B1E-3A0D is part of the F5 Combivert Axis Drives series and supports a maximum motor power of 10 HP at 230V. It features an incremental TTL encoder interface using a SubD connector and is equipped with a braking transistor as an installed accessory.
Internal Product Review
The 14.F5.B1E-3A0D is a KEB Combivert F5 axis drive that stands out in 10 HP motor applications. An incremental TTL encoder interface with SubD connector and a TTL auxiliary signal output support clean feedback handling and straightforward control integration. The integrated braking transistor is a valuable addition for controlled deceleration, making this drive a strong performer in motion systems.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The 14.F5.B1E-3A0D axis drive is produced by KEB and belongs to the F5 Combivert Axis Drives series. It converts fixed mains power into the variable frequency and voltage needed to control asynchronous and synchronous motors in conveyor sections, packaging lines, and material-handling systems. The drive serves as the power stage in a servo loop by receiving position feedback and delivering regulated current to the connected motor. This closed-loop arrangement allows the axis to follow commanded position, speed, and torque profiles with repeatable accuracy. Its operating role makes it suitable for machinery that requires controlled acceleration, steady motion, and precise deceleration during repetitive production cycles.
Auxiliary status and speed signals are transmitted through a TTL-level output, which supports direct connections to compatible PLC inputs without separate level shifters. For primary feedback, the unit provides an incremental TTL encoder interface through a Sub-D port, allowing the controller to count signal edges and calculate velocity in real time. The power stage supports up to 10 HP of mechanical output, enabling appropriately matched motors to operate continuously within the drive’s capacity. Mechanical and electrical clearances correspond to size code 14, with busbar spacing, heat sink dimensions, and connector positions arranged for that frame. A built-in braking transistor manages regenerated energy during rapid deceleration and can remove the need for a separate external chopper board in many installations. This energy-handling capability is useful on axes that stop frequently or return substantial kinetic energy to the DC bus.
The enclosure uses form factor E, providing a slim profile for densely populated control cabinets while maintaining clearance around the top-entry power terminals. When connected to a 230 V three-phase supply, the inverter can deliver its full rated output for Unit B, supporting consistent machine operation on compatible power systems. The Combivert F5 platform uses shared parameter menus, diagnostic codes, and fieldbus options across companion drive sizes. These common controls simplify configuration when multiple F5 units operate within the same automation system. Compatibility with KEB parameter tools allows the appropriate default settings to be loaded and operating values to be adjusted for the connected motor. Cabinet airflow must remain unobstructed around the heat sink so generated heat can leave the enclosure during sustained operation.
