14.F5.B1E-3A0A KEB
Wake Industrial LLC is not an authorized distributor of this product.
The KEB 14.F5.B1E-3A0A is part of the F5 Combivert Axis Drives series and has a maximum motor power of 10 horsepower at 230V. This drive features 5 digital inputs, 17 control terminals, 2 relay outputs, and one analog input and output, with an I/O scan time of 2 milliseconds. It comes equipped with a braking transistor and operates within a temperature range of -10°C to 45°C, featuring IP20 protection.
Internal Product Review
The 14.F5.B1E-3A0A is a KEB F5 Combivert axis drive that offers 10 HP motor capacity and an integrated braking transistor. A 2 ms I/O scan time and 800 Hz maximum output frequency support responsive, high-speed drive control. IP20 protection makes this unit a strong choice for enclosed industrial installations.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
KEB manufactures the 14.F5.B1E-3A0A drive within the F5 Combivert Axis Drives series. This unit is a variable-frequency inverter intended to regulate three-phase induction or synchronous motors in factory automation. By adjusting output voltage and frequency, it coordinates conveyor, pump, or positioning axes while integrating into PLC networks through discrete, analog, and software channels. Its installed braking transistor handles regenerative energy during rapid deceleration, and inverter size code 14 indicates the mechanical frame and cooling capacity used for this power class.
Rated for 10 HP, the inverter uses size code 14 and housing form factor E to support moderate mechanical loads on 230 V supplies. Motor speed control spans from zero to 800 Hz, while the IGBT bridge can switch up to 16 kHz; this higher carrier frequency helps reduce acoustic noise and smooth the motor current waveform. Process data updates occur every 2 ms through the internal bus, and the terminal strip provides 17 hardwired control points for run commands, fault reset, and diagnostics. The available interface set also includes one analog input, one analog output, five digital inputs, two relay outputs, and four software-configurable channels that use PNP input logic. This combination allows the drive to fit both simple speed control duties and more coordinated machine functions without making the control layout difficult to follow.
The enclosure meets IP20, so the drive must be installed in a closed panel. Continuous operation is permitted from -10 °C up to 45 °C, while non-operating storage is allowed down to -25 °C and up to 70 °C. Closed-panel mounting also helps reduce exposure to accidental contact and airborne debris in open machine areas. Eight selectable programs allow storage of 8 parameter sets, which supports quick changeover between different motor or application profiles. A factory-installed braking transistor dissipates regenerated energy during deceleration, and the PNP input architecture simplifies wiring with common 24 V control sources.
