14.F5.ABE-3AHA KEB
Wake Industrial LLC is not an authorized distributor of this product.
The KEB 14.F5.ABE-3AHA is an axis drive from the F5 Combivert Axis Drives series with a maximum motor power of 10 HP and supports input supplies of 3-phase 400 V AC/DC. It features 8 digital inputs, 2 analog inputs and outputs, and offers a resolver plus TTL encoder interface. The drive has 29 control terminals, 2 relay outputs, and a maximum short-time current of 180%.
Internal Product Review
The 14.F5.ABE-3AHA is a KEB F5 Combivert axis drive built for motion control with a 3-phase 400 V AC/DC input and 10 HP motor capacity. The resolver plus TTL encoder interface and switchable PNP/NPN digital logic support flexible integration and reliable feedback processing. A 180% max short-time current adds valuable overload capability, making the drive a strong choice for responsive axis applications.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The 14.F5.ABE-3AHA is an AC inverter axis drive manufactured by KEB within the F5 Combivert Axis Drives series. It forms the regulated link between a motion controller and a three-phase motor, converting fixed-frequency input power into variable voltage and frequency for positioning, conveying, or pumping applications. By integrating power semiconductors, signal processing, and fault monitoring, the unit supplies controlled torque while protecting connected machinery from electrical and thermal overloads common in industrial automation.
The drive is compatible with a 400 V AC/DC supply and is built on inverter size code 14 inside the E-class housing. It supports motors up to 10 HP, and this rating also applies when the Unit B variant operates on 230 V lines. Short-term overload capacity reaches 180% of nominal current, while an instantaneous overcurrent trip at 216% helps prevent device damage during severe faults. A carrier switching frequency of 8 kHz reduces acoustic noise without compromising control accuracy. Eight selectable parameter sets allow users to switch between different machine recipes or load types without reloading the control configuration.
Input, output, and feedback connections are located on the standard control board. The board has 29 spring-clamp terminals that accommodate eight digital inputs, two analog inputs, two analog outputs, two relay outputs, two transistor outputs, and four software-assignable input or output points. The input logic is field-configurable as PNP or NPN, allowing the digital interface to work with sourcing or sinking control signals. An auxiliary bus keeps the interface active through an external 24 V supply when the main power is isolated. Motion feedback is accepted through a resolver and TTL channel, allowing compatible position signals to reach the control loop. These connections support analog reference tracking, sensor input, actuator signaling, and encoder feedback in automated axis applications.
