14.F5.A1D-38-A KEB
Wake Industrial LLC is not an authorized distributor of this product.
The KEB 14.F5.A1D-38-A is part of the F5 Combivert Axis Drives series and operates with a 3-phase 400 V AC/DC supply and a standard control board. This drive supports a maximum motor power of 10 horsepower and is equipped with a braking transistor. It features a rated current of 16.5 amps and a peak current of 29.7 amps, with a maximum short-time current of 180%.
Internal Product Review
The 14.F5.A1D-38-A is a KEB Combivert F5 axis drive designed for 3-phase 400 V AC/DC input supply and 10 HP motor applications. A standard control board and incremental input/inc. I/O encoder interface support clean integration and dependable motion feedback. The installed braking transistor is a strong advantage for demanding axis applications.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The 14.F5.A1D-38-A is an axis drive module manufactured by KEB for the F5 Combivert Axis Drives series. It operates as a variable-frequency inverter that conditions incoming power and modulates the motor output for precise speed, torque, and position control in automated machinery such as conveyors, extruders, and coordinated servo axes. Incremental encoder inputs and digital I/O on the standard control board support closed-loop positioning and allow the drive to respond accurately to changing motion commands.
The power section accepts a three-phase 400 V AC supply or a corresponding DC input, and its continuous output capacity is 16.5 A. This continuous current establishes the thermal baseline for selecting suitable cables and protective fuses. During acceleration or sudden load changes, the unit can provide a peak current of 29.7 A, while its short-term overload capacity reaches 180% to handle brief torque spikes. Protective logic disables the drive output when demand reaches the 216% overcurrent trip level, helping prevent semiconductor damage under jam or stall conditions. These current limits work with the integrated braking transistor, which diverts regenerated energy from the DC link during deceleration and helps control rising bus voltage.
The enclosure uses inverter size code 14 within a compact D housing, allowing installation in standard panels that are 300 mm deep and use top-entry airflow. Compliance with EMC category C1 allows the drive to operate in low-voltage cabinets containing sensitive instrumentation without requiring external output filters. A selectable carrier frequency of 2/16 kHz allows users to balance acoustic noise, motor heating, and operating efficiency for the connected application. With a general motor rating of 10 HP, the device is suitable for mid-range pumps, fans, and process drives. When configured as Unit B, the drive can also operate with a 230 V supply, providing an additional connection option for compatible machinery.
