14.56.200-A349 KEB
Wake Industrial LLC is not an authorized distributor of this product.
The KEB 14.56.200-A349 is part of the F5 Combivert Axis Drives series and supports a maximum motor power of 10 horsepower with a rated current of 16.5 amps. This drive operates with 3 input phases at 380 to 415 volts AC and an input frequency of 50 or 60 Hz. It features an encoder interface type UVW, a TTL auxiliary signal output, and has a protection rating of IP00.
Internal Product Review
The 14.56.200-A349 is a KEB F5 Combivert axis drive designed for dependable motion control on 380/400/415 V AC three-phase input. A 16.5 A rated current and 11 kVA rated power give the unit strong capacity for demanding servo applications. The TTL auxiliary signal output paired with a UVW encoder interface supports clean feedback integration, making this drive a very capable axis-control solution.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The 14.56.200-A349 is an inverter drive manufactured by KEB and supplied in the F5 Combivert Axis Drives series. Intended for integration into distributed or centralized automation, the drive modulates three-phase power to control motor speed, position, and torque during continuous or cyclic duty. It supports UVW encoder feedback and provides a TTL auxiliary signal so that a supervisory PLC can receive direct position information. This makes the unit suitable for axes that need closed-loop motor control and straightforward feedback transfer to higher-level control hardware. Its inverter size code 14 housing matches other F5 modules, which helps maintain consistent cabinet spacing for thermal clearance and wiring routes across coordinated motion axes.
Electrically, the drive is rated to deliver 16.5 A of output current while handling a continuous apparent power of 11 kVA. It accepts a three-phase mains supply at 380/400/415 V AC and synchronizes its rectifier section to line frequencies of 50/60 Hz. Within that input range, the unit can operate motors up to 10 HP, allowing one hardware type to serve medium-duty pumps, fans, or material-handling actuators. This combination supports applications that need controlled acceleration, stable running speed, and repeatable torque response from one inverter section. The internal mains fuse limit is 25 A, and the minimum wire cross-section of 4 mm² helps keep copper conductors within an acceptable temperature rise under full load.
Mechanically, the housing stands 388 mm tall, spans 248 mm in width, and extends 210 mm in depth, dimensions that allow direct mounting to a back panel through 7.2 mm holes without external brackets. This layout supports fixed panel installation and leaves clearance around the power section for cabinet airflow. The enclosure mass of 11.0 kg provides a solid mounting presence and supports heat dissipation from the power section. Operation is permitted up to 3000 m above sea level in relative humidity as high as 95%. The open-chassis IP00 rating requires installation inside a protected electrical cabinet with forced-convection airflow.
