14.F5.G1D-380A KEB
Wake Industrial LLC is not an authorized distributor of this product.
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
The KEB 14.F5.G1D-380A is an axis drive from the F5 Combivert Axis Drives series featuring a three-phase 400 V AC/DC input supply and an IP20 enclosure. This drive supports up to 10 HP motor power and includes a braking transistor as an installed accessory. It measures 250 mm in height, 90 mm in width, and 181 mm in depth, with a rated current of 16.5 Amps and a peak current of 29.7 Amps.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The 14.F5.G1D-380A is an inverter drive manufactured by KEB within the F5 Combivert Axis Drives series. Designed for industrial automation lines, the unit converts a fixed three-phase supply into a variable-frequency output that matches the torque and speed needs of rotary axes. It is suitable for acceleration, deceleration, and positioning tasks in packaging, material-handling, and process equipment. The drive also integrates with motion controllers and fieldbus networks used in coordinated machine systems.
The drive accepts a 3-phase 400 V AC/DC input and is coded as inverter size 14, so the cabinet can be laid out with the required busbar spacing. Under nominal conditions, the drive has a rated current of 16.5 A, while its control electronics switch the output devices at 2 kHz. When higher dynamic bandwidth is needed, the carrier can be raised to 16 kHz. Protective logic trips if phase current reaches 35.6 A, and the silicon is thermally sized to deliver a momentary peak current of 29.7 A for rapid torque demand. A braking transistor is installed, allowing energy from overhauling loads to be routed to an external resistor without extra modules. The unit can supply up to 10 HP at 230 V for dual-voltage motors, and its conducted emissions meet EMC Class C1 for installations in sensitive control areas.
Physically, the housing measures 181 mm deep, 90 mm wide, and 250 mm high, allowing it to fit into narrow machine columns with adequate convection space above and below the fins. The IP20 enclosure provides basic finger protection and relies on the surrounding cabinet for additional environmental sealing. Cutouts on the top edge simplify heat rise paths, while molded guides on the base align the drive with backplane connectors used in the F5 family. This layout allows placement near contactors, fuses, and feedback modules while preserving safe clearance distances.
Frequently Asked Questions about 14.F5.G1D-380A:
Q: What is the maximum motor power supported by the 14.F5.G1D-380A axis drive?
A: The 14.F5.G1D-380A supports a maximum motor power of 10 HP when operated at both 230V and 400V.
Q: What type of input supply does the 14.F5.G1D-380A require?
A: This drive features an input supply of 3-phase 400 V AC/DC.
Q: What accessory is installed on the 14.F5.G1D-380A by default?
A: The drive comes with an installed braking transistor as an accessory.
Q: What is the enclosure rating of the 14.F5.G1D-380A drive?
A: It has an enclosure rating of IP20, offering basic protection against solid objects.
Q: What is the peak current capability of the 14.F5.G1D-380A axis drive?
A: The peak current for the 14.F5.G1D-380A is rated at 29.7 A, allowing for short high-current operation.
