13.F5.B1D-Y00E KEB
Wake Industrial LLC is not an authorized distributor of this product.
The KEB 13.F5.B1D-Y00E is an axis drive from the F5 Combivert Axis Drives series designed for motors up to 7.5 HP and supports a rated output power of 8.3 kVA. It has an input voltage range of 305 to 528 VAC across 3 phases and features IP20 protection. This drive is equipped with a braking transistor and can operate at altitudes up to 2000 meters, with an operating temperature range from -10 to 45 degrees Celsius.
Internal Product Review
The 13.F5.B1D-Y00E is a KEB F5 Combivert axis drive designed for dependable motion control on 400 VAC three-phase input. A 12 A rated output current paired with 8.3 kVA output power supports stable axis performance and clean drive response. IP20 protection and an integrated braking transistor make the unit a strong choice for controlled industrial drive applications.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The 13.F5.B1D-Y00E is an inverter from KEB that belongs to the F5 Combivert Axis Drives series. By generating a variable frequency and voltage output, the unit lets controllers adjust the speed and torque of three-phase motors used in conveyors, forming machines, or servo axes. This makes it suitable for systems that need smooth acceleration, controlled deceleration, and stable speed under changing loads. Its electronic platform is sized for mid-power installations where cabinet space is limited and precise closed-loop regulation is required.
This drive is wired to a three-phase supply rated at 400 VAC, and its internal rectifier can also be tied to a common DC bus operating between 420...746 VDC. Under nominal conditions, it draws 17 A from the line and delivers 12 A to the motor terminals, which corresponds to a continuous apparent output of 8.3 kVA. These limits set the thermal load on the power stage during continuous operation. The integrated braking transistor dissipates regenerated energy during deceleration to help prevent overvoltage trips, and it works with external resistors sized for the application. That arrangement supports applications with frequent stopping and reversing without forcing the DC bus voltage too high.
The permissible mains window spans 305...528 VAC, allowing the same unit to operate on supply systems that vary above or below nominal voltage. Its enclosure carries an IP20 rating, so the drive is intended for installation inside a switchgear cabinet where accidental contact with internal live parts is restricted. Full performance is maintained up to 2000 m site altitude and within an ambient range of -10...45 °C; outside these limits, output current must be reduced. The unit uses housing size D and inverter size code 13, and its sine-coded output keeps motor voltage proportional to frequency across the speed range. This helps connected motors maintain predictable torque behavior as commanded speed increases or decreases.
