13.F5.A1D-39PA KEB
Wake Industrial LLC is not an authorized distributor of this product.
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
The KEB 13.F5.A1D-39PA is part of the F5 Combivert Axis Drives series and has a rated output power of 8.3 kVA with a protection rating of IP20. This drive supports an input voltage range of 305 to 528 V AC and has a maximum motor power of 7.5 HP. It features a standard control board, a braking transistor accessory, and EnDat encoder input with TTL output.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
KEB’s 13.F5.A1D-39PA belongs to the F5 Combivert Axis Drives series and functions as a three-phase inverter for coordinating servo or induction motors on automated machinery. It is supplied with a Standard Board control section, integrates a braking transistor for controlled deceleration, and is sized as code 13 within the platform. The drive accommodates EnDat feedback on its encoder input and retransmits position data through a TTL output, enabling synchronized motion loops. This arrangement lets the controller read motor position and pass feedback signals to related equipment without extra interface hardware. With a motor capability of 7.5 HP, the unit suits medium-power axes in packaging lines, material handling systems, or process equipment.
The power section accepts a mains span of 305...528 V AC and, when tied to a DC bus, operates over 420...746 V DC; this dual range allows common-bus or standalone installation. Nominal output is rated at 8.3 kVA and delivers a continuous phase current of 12 A, providing steady torque to matched motors. Speed regulation is achieved by modulating the output between 0...400 Hz, while carrier pulses can be set up to 16 kHz for low-noise motor operation; the factory default switching frequency is 4 kHz when higher efficiency is preferred. The internal standard board supervises operating limits together with the braking transistor. This helps the drive manage deceleration energy during repeated start-and-stop motion.
Circuit protection includes a fast hardware trip at 25.9 A and a momentary overload allowance of 21.6 A, letting the axis overcome short acceleration peaks without nuisance faults. The enclosure carries an IP20 rating, so it must be mounted inside a control cabinet where finger-safe protection is sufficient and no direct dust ingress or washdown is present. Because the housing is open to cabinet air, the drive should be installed away from coolant mist and conductive debris. The rated line draw, the overload behavior, and the base carrier setting help size supply breakers, select cabling, and check thermal balance around the drive.
