13.F5.A1D-390A KEB
Wake Industrial LLC is not an authorized distributor of this product.
The KEB 13.F5.A1D-390A is an axis drive from the F5 Combivert Axis Drives series with a rated input voltage of 400 V and operates on 3-phase AC. It has a peak output current of 21.6 Amps and supports a maximum motor power of 7.5 HP. The unit features a standard control board, 17 control terminals, and offers IP20 enclosure protection.
Internal Product Review
The 13.F5.A1D-390A is a KEB F5 Combivert axis drive with 3-phase AC input and a standard control board. IP20 enclosure protection and an integrated braking transistor make the unit especially appealing for protected panel installations with controlled deceleration requirements. Rated output current of 12 A and peak output current of 21.6 A give this drive strong headroom for dependable motion control.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The 13.F5.A1D-390A is an AC axis drive module produced by KEB for the F5 Combivert Axis Drives series. The unit functions as a power stage that modulates line voltage and frequency to match motor demand, enabling coordinated motion control in conveyors, packaging machinery, and general factory automation cells. By providing velocity and torque adjustment without mechanical gear changes, it supports efficient operation and simplifies maintenance within multi-axis systems.
The drive accepts a three-phase supply and is designed for a nominal line voltage of 400 V. Its internal power devices operate at a factory-set switching frequency of 4 kHz, while the adjustable frequency can be increased to 16 kHz when lower acoustic noise or smoother motor current is required. Continuous motor current is limited to 12 A, which establishes the allowable thermal load under rated operating conditions. Protective circuits permit additional current during acceleration and braking, while short-circuit and overtemperature protection prevent sustained operation beyond safe limits. The housing has an IP20 enclosure rating, so the drive must be installed inside a suitable control cabinet. Cabinet airflow must provide adequate forced convection to remove heat from the power stage during continuous operation.
The housing measures 90 mm wide, 250 mm high, and 181 mm deep, permitting dense installation on 200 mm rail systems. The frame corresponds to inverter size code 13, and a factory-installed braking transistor dissipates regenerated energy during rapid deceleration. A standard control board provides 17 low-voltage terminals for input and output signals, fieldbus adapters, and encoder connections. For short operating periods, the output stage can deliver up to 21.6 A, providing the additional torque needed to accelerate a 7.5 HP motor without increasing the continuous-current capacity of the cabinet supply. The compact housing, integrated braking transistor, and accessible control terminals support orderly wiring and practical cooling arrangements in multi-axis control cabinets.
