Product Description:

The 13.F5.ABD-YH01 axis drive belongs to the F5 Combivert Axis Drives series produced by KEB. Designed for cabinet mounting, the drive supplies regulated three-phase output to match commanded speed or torque, allowing a PLC or motion controller to synchronize individual motors in packaging lines, material-handling cells, or similar automated stations. By integrating power electronics, gating logic, and control functions in one housing, it serves as a compact motor inverter within distributed control architectures. This arrangement supports coordinated motor operation without requiring a separate inverter stage elsewhere in the cabinet.

The unit operates from a three-phase mains window classified at 400 V AC/DC; this voltage class affects insulation clearances, semiconductor ratings, and recommended fusing for the installation. When connected to 230 V motors, the drive can deliver up to 7.5 HP, making it suitable for mid-frame pumps, fans, or indexing axes. An overcurrent protection circuit trips at 480% of rated current to protect switching devices against shorted loads, while permissible short-time overload reaches 400% for acceleration or peak torque events. Internal IGBTs switch at 4 kHz, which limits motor acoustic noise while keeping switching losses within fan-cooled limits. The enclosure carries an IP20 protection code, indicating finger-safe openings and a requirement for installation in a controlled electrical cabinet to reduce dust or liquid ingress.

The drive is built in Housing Type D, so its mounting footprint aligns with other D-coded modules for stacked airflow paths. It uses Inverter Size Code 13, which corresponds to the frame height, bus capacitor value, and terminal pitch used by the unit. The control section uses a Standard Board, which provides the default I/O, relay contacts, and parameter memory. Because the model lists no dedicated encoder interface, operation relies on open-loop or sensorless vector modes unless an option card is added.