12.F5.CBD-YA00 KEB
Wake Industrial LLC is not an authorized distributor of this product.
The KEB 12.F5.CBD-YA00 is part of the F5 Combivert Axis Drives series and offers a rated output current of 9.5 Amps with a general maximum motor power of 5 HP. This compact control type drive features an analog input resolution of 11 bits, digital input scan time of 1 millisecond, and operates with an analog output PWM frequency of 3.4 kHz.
Internal Product Review
The 12.F5.CBD-YA00 is a KEB F5 Combivert axis drive with compact control architecture and support for motors up to 5 HP. Fast 1 ms digital input scan time and an 8 kHz rated switching frequency give this unit sharp response and consistently stable drive performance.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The 12.F5.CBD-YA00 is a compact axis inverter drive manufactured by KEB as part of the F5 Combivert Axis Drives series. It converts fixed-frequency AC supply power into variable voltage and frequency so connected motors can accelerate, decelerate, or maintain speed under open-loop or closed-loop regulation. In coordinated industrial machinery, this drive forms the power interface and accepts reference commands through analog, digital, or network links to position conveyors, light machine tools, or automated handling axes with consistent torque delivery. Its compact format suits installations where panel space is limited but controlled motor response is still required.
Its power channel supports a continuous output of 9.5 A, aligning with the thermal limits of mid-frame induction or synchronous motors. For lower acoustic noise and smoother flux transitions, the IGBT stage commutates at 8 kHz. Incoming speed or torque demands reach the controller through differential analog lines and are digitized at 11-bit resolution every 2 ms, while feedback or trim values leave the unit on pulse-width-modulated analog outputs with 12-bit granularity at 3.4 kHz. Safety and sequencing contacts land on digital terminals with 2.1 kΩ input resistance and are sampled every 1 ms so edge detection remains deterministic in fast-cycle automation. This arrangement supports stable signal handling when the drive must react quickly to changing command states.
The integrated 24 V service supply can deliver 100 mA to encoders or proximity switches, eliminating the need for an external source for low-power field devices. When matched to proper cooling and wiring, the inverter can drive motors up to 5 HP without derating. System status or fault signals reach external circuits through a form-C relay rated at 1 A, allowing direct actuation of brakes or indicator lamps. For analog reference chains, a buffered output of +10 VDC is available so potentiometers or PLC modules can set speed without an additional regulator. The built-in auxiliary functions help reduce extra interface components around the drive.
