12.F5.CBB-YM00 KEB
Wake Industrial LLC is not an authorized distributor of this product.
The KEB 12.F5.CBB-YM00 is an axis drive from the F5 Combivert Axis Drives series capable of supporting a maximum motor power of 5 HP and a maximum output frequency of 800 Hz. It features 2 analog inputs with 12-bit resolution, 8 digital inputs, and 2 analog outputs with 11-bit resolution. The drive provides 2 ms I/O scan time, an internal 24 V DC supply, and includes 29 terminals.
Internal Product Review
The 12.F5.CBB-YM00 is a KEB F5 Combivert axis drive rated for 5 HP with a maximum output frequency of 800 Hz. Control integration is strong with 8 digital inputs and a 2 ms I/O scan time. A maximum switching frequency of 16 kHz makes the unit a capable choice for responsive motion applications.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The 12.F5.CBB-YM00 is an inverter drive produced by KEB and supplied under the F5 Combivert Axis Drives series. Installed in control panels, it modulates the voltage and frequency delivered to three-phase motors, enabling closed-loop speed and torque control for automated machines such as packaging stations, conveyors, and positioning axes. The unit’s B-size housing simplifies cabinet layout, while the integrated I/O block allows direct coupling to plant controllers without auxiliary interface modules.
The inverter can energize machines up to 5 HP and generates carrier pulses at a maximum switching rate of 16 kHz, giving the drive quiet acoustic performance and fine current resolution. Motor speed is trimmed over an output range that reaches 800 Hz, while control tasks refresh every 2 ms through the built-in processor. Internal electronics are powered from a dedicated 24 V DC supply rail, keeping the logic active and isolated when main power is removed. Two analog outputs with 11-bit resolution transmit speed or torque feedback, and two unbuffered digital outputs share a 50 mA current budget for status signaling. Additional field wiring is supported through size-12 power modules and the B-size enclosure.
Two analog inputs sample command signals at 12-bit resolution, and the control board provides 8 digital inputs for start, stop, jog, or preset selection. Relay circuitry includes two form-C contacts rated at 1 A at 30 VDC for interlock chains or fault annunciation. System configuration is stored in eight parameter sets, and four software I/O flags provide the PLC with virtual bits for mode changes. Encoder feedback hardware is absent, so speed estimation relies on the flux model. The terminal strip provides 29 terminals that accommodate the power, control, and relay connections required by the axis.
