12.F5.L1D-YW0A KEB
Wake Industrial LLC is not an authorized distributor of this product.
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
The KEB 12.F5.L1D-YW0A is part of the F5 Combivert Axis Drives series and is equipped with an IP20 enclosure and an inverter size code of 12. It features 8 digital inputs, 2 analog inputs with 12-bit resolution, and 2 analog outputs with 11-bit resolution. The drive supports a general maximum motor power of 5 HP and provides relay outputs rated at 30 VDC and 1 Amp.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The 12.F5.L1D-YW0A is an axis drive manufactured by KEB for the F5 Combivert Axis Drives series. It modulates three-phase power for machines that require accurate speed and torque control, linking higher-level PLC commands with the dynamic demands of a connected motor. By integrating power electronics, local I/O processing, and a braking stage, the unit supports continuous motion tasks in conveyors, winders, and packaging stations. Its integrated design reduces the number of separate control components required within an industrial automation system.
This drive operates in the 400 V voltage class and can energize motors rated up to 5 HP, making it suitable for machinery that requires moderate shaft power. A factory-installed braking transistor dissipates regenerative energy and prevents DC-bus overvoltage during rapid deceleration. A scan time of 1 ms supports responsive loop updates between the drive and controller. The housing has an IP20 rating, so the unit must be installed in a switchgear cabinet while providing protection against accidental finger contact with internal components. Its dimensions of 90 × 250 × 181 mm help conserve cabinet space, while inverter size code 12 indicates the applicable thermal and current range. The terminal strip can accept an external 24 V supply for logic backup, allowing parameter retention and fieldbus communication while the power stage is off.
The drive has two analog inputs with 12-bit resolution for receiving speed or torque commands. Two analog outputs with 11-bit resolution can transmit operating feedback such as current or output frequency. Eight digital inputs accommodate start, direction, and preset functions, while two digital outputs provide a shared load capacity of 50 mA total for status lamps or interlocks. Two relay outputs rated for 30 VDC and 1 A provide floating contacts for controlling devices such as motor contactors. An internal 24 V DC control supply powers the onboard processor. These connections are accessible from the front panel, allowing direct wiring without the need for separate I/O islands.
