10.F5.C3B-YQ1A KEB
Wake Industrial LLC is not an authorized distributor of this product.
The KEB 10.F5.C3B-YQ1A is part of the F5 Combivert Axis Drives series and supports a 400 V AC or AC/DC input voltage with a control supply of 24 V DC. It offers 8 digital inputs, 2 analog inputs at 12-bit resolution, and is equipped with braking transistor and EMI filter accessories. This drive features 2 relay outputs rated for 30 VDC at 1 A, and supports up to 3 HP motor power.
Internal Product Review
The 10.F5.C3B-YQ1A is a KEB Combivert F5 axis drive built for precise motor control on 400 V AC or AC/DC systems. A 2 ms I/O scan time and incremental encoder interface support responsive feedback handling and efficient machine integration. An installed braking transistor and EMI filter make the drive a well-equipped choice for 3 HP applications.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The 10.F5.C3B-YQ1A is an axis inverter manufactured by KEB for the F5 Combivert Axis Drives series. It converts fixed mains power into a variable-frequency output so a single machine axis can accelerate, decelerate, and maintain speed under PLC command. Integrated control and power sections make it suitable for conveyors, form-fill-seal equipment, and metal-processing cells that require coordinated motion. Its architecture follows the modular Combivert F5 platform, allowing the drive to use menu structures and networking options available across other sizes in the platform.
Power enters through a mains terminal designed for 400 V AC or AC/DC supplies, while a separate 24 V DC control rail keeps the internal electronics active and preserves fieldbus communication during brownouts. Rated for up to 3 HP, the size 10 unit supports small to medium-frame induction or servo motors used on secondary axes. Two analog inputs are digitized at 12-bit resolution, and eight digital inputs accept PNP or NPN signals in the 13–30 V DC range. A pair of analog outputs returns speed or torque references to connected control equipment. The incremental encoder interface accepts quadrature signals and distributes marker pulses for position tracking. Cyclic processing is completed every 2 ms, keeping commands, feedback, and protective trips synchronized with motor operation.
Two open-collector output stages share a 50 mA current budget, while two relay contacts rated at 30 V DC / 1 A support hardwired interlocks. Both output sets are scanned with the analog task, which repeats every 250 ms. The spring clamps are grouped in a block containing 29 terminals, providing centralized access for control and signal wiring. The enclosure uses form-factor code B, allowing the unit to mount directly on standard F5 backplates without adapter plates. An installed braking transistor dissipates regenerated energy during rapid stops, and an internal electromagnetic interference filter reduces conducted noise on connected power lines.
