10.F5.B1B-3A00 KEB
Wake Industrial LLC is not an authorized distributor of this product.
The KEB 10.F5.B1B-3A00 is part of the F5 Combivert Axis Drives series and operates with a 3-phase 400 V AC/DC input supply. It has a rated current of 5.8 Amps and a maximum motor power of 3 HP, with dimensions of 220 mm in height, 90 mm in width, and 160 mm in depth. This drive features five digital inputs, an IP20 enclosure, and a braking transistor as a standard accessory.
Internal Product Review
The 10.F5.B1B-3A00 is a KEB F5 Combivert axis drive with 3-phase 400 V AC/DC input and an IP20 enclosure. An installed braking transistor and 800 Hz maximum output frequency support responsive motor control, making this unit a strong choice for dynamic drive applications.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The 10.F5.B1B-3A00 is an AC axis drive manufactured by KEB and placed in the F5 Combivert Axis Drives series. This inverter is designed to control the speed and torque of three-phase induction or permanent-magnet motors up to 3 horsepower, making it suitable for conveyors, packaging machines, and other motion axes that need precise electronic regulation. By converting the fixed plant mains into a variable-frequency, variable-voltage output, the unit provides closed-loop motor control inside industrial automation lines. This arrangement allows coordinated motor response during acceleration, steady-state running, and deceleration on automated axes.
The drive draws power from a 3-Ph 400 V AC/DC bus and delivers a continuous output of 5.8 A. When load peaks occur, the short-time current rises to 180% of nominal without tripping, while an overcurrent cutoff is set at 12.5 A to protect the semiconductors. Output frequency is adjustable from zero up to 800 Hz, letting the application run high-speed spindles as well as slow positioning axes. Carrier modulation is factory-set at an 8 kHz nominal switching rate, with a 16 kHz limit for quieter operation if thermal margins allow. Five opto-isolated digital inputs are scanned every 2 ms for fast reaction to field sensors, and an internal braking transistor dissipates regenerated energy during rapid deceleration. The control stage can react quickly to command changes and sensor states during frequent starts and stops.
The open-style housing carries an IP20 rating, so it must be mounted inside a switch cabinet with forced ventilation. The compact enclosure measures 90 mm in width, 220 mm in height, and 160 mm in depth. The open housing relies on cabinet airflow rather than a sealed enclosure, so panel layout must provide a clear path for heat removal. The size-10 frame code matches the heat sink and connection pattern used across the mid-power range of F5 drives, and the absence of an encoder feedback card leaves the front slot available for option boards. These dimensions allow the drive to be mounted near motor starters or contactors without exceeding cabinet depth.
