10.F5.B1B-2A0A KEB
Wake Industrial LLC is not an authorized distributor of this product.
The KEB 10.F5.B1B-2A0A is part of the F5 Combivert Axis Drives series and features a general maximum motor power of 3 HP with a peak current of 21.6 Amps. This drive has an IP20 enclosure and provides 5 digital inputs, as well as 1 analog input and 1 analog output with 11-bit resolution. It is equipped with a braking transistor and operates at a PWM frequency of 8 or 16 kHz.
Internal Product Review
The 10.F5.B1B-2A0A is a KEB F5 Combivert axis drive with a 1/3-phase 230 V AC/DC supply and 10 A rated current. An integrated braking transistor and 21.6 A peak current support confident deceleration control and strong overload handling in compact motion systems. IP20 enclosure protection and a 2 ms I/O scan time make the unit a strong choice for responsive panel-mounted drive applications.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The 10.F5.B1B-2A0A is an AC inverter unit built by KEB within the F5 Combivert Axis Drives series. Designed for machine-level motion tasks, the drive interfaces between a 1- or 3-phase 230 V mains supply and a motor winding. It modulates voltage and frequency so that speed, torque, and braking energy can be controlled in real time on packaging lines, conveyors, and positioning stages.
Mounted inside a control cabinet, the unit carries an IP20 enclosure rating, indicating finger-safe construction. When supplied by a 1- or 3-phase 230 V AC or DC line, it can drive motors up to 3 HP, while its internal 24 V DC rail powers logic circuits. The power stage delivers 10 A continuously and up to 21.6 A for short acceleration bursts, and current is chopped at 8/16 kHz to limit acoustic noise and torque ripple. A braking transistor diverts regenerative energy to an external resistor. Inverter size code 10 corresponds to the housing dimensions and heat sink capacity, PNP logic is expected at the control terminals, and two form-C relays rated 30 V DC at 1 A provide status or fault signals.
Control connectivity centers on one differential analog channel with 11 bit resolution, one analog output, and 5 digital inputs that can be scanned by the microprocessor every 2 ms for command execution. The EMC classification of C1 supports installation on equipment connected to public low-voltage networks without additional line filters. A single 8-pin header delivers the digital I/O, reducing wiring effort, while the isolated relay contacts allow safe interfacing with interlocks. The drive’s peak current capability, rapid PWM carrier, and responsive scan cycle help maintain torque accuracy during load changes, and the pre-installed braking transistor helps protect both the DC link and the motor during overhauling loads.
