10.F5.ADD-YM0M KEB
Wake Industrial LLC is not an authorized distributor of this product.
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
The KEB 10.F5.ADD-YM0M belongs to the F5 Combivert Axis Drives series and features a standard control board with a TTL auxiliary signal output type. This drive is rated for 400 V AC input and provides a 5.8 amp output current with a maximum motor power of 3 horsepower. It also includes a Sin/Cos encoder interface and delivers a rated output power of 4.0 kVA.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The 10.F5.ADD-YM0M is a three-phase inverter module manufactured by KEB for the F5 Combivert Axis Drives series. It serves as the power stage between the plant power bus and a machine axis, modulating voltage and frequency so that induction or synchronous motors follow precise speed and torque commands. By integrating power electronics, signal processing, and feedback links, the unit allows a PLC or motion controller to perform coordinated positioning, indexing, and load control without separate starters or contactors. Because the inverter regulates motor output continuously, it can support controlled acceleration, deceleration, and steady running in automated equipment.
Electrically, the drive is optimized for a mains supply of 400 V AC, and at that level it can deliver a continuous output current of 5.8 A. At this operating point, the apparent power is 4.0 kVA, reflecting the load handled by the power section during normal operation. The power section is matched to motors up to 3 HP, which suits moderate-power axes in compact machinery. Position feedback enters through a Sin/Cos encoder interface, giving the control loop sine and cosine signals that support smooth velocity estimation, even at low speeds. This arrangement helps the drive maintain responsive closed-loop behavior during positioning tasks and speed changes.
To synchronize those electrical limits with downstream controls, the auxiliary data channel transmits step information in TTL level form, allowing high-speed counters or CNC inputs to register motor rotation without additional level shifters. Internal logic is handled by a Standard Board, which carries digital processors, gate drivers, and protection circuits used for drive operation. Mechanical footprint and heat-sink dimensions correspond to size code 10, which sets the housing size for this module. The unit is part of the Combivert F5 platform and uses the control architecture associated with that product line. These features support straightforward integration into motion systems that require compact drive hardware and consistent signal handling.
