10.F5.A1D-3A0A KEB
Wake Industrial LLC is not an authorized distributor of this product.
The KEB 10.F5.A1D-3A0A is part of the F5 Combivert Axis Drives series and features a GTR7 integrated braking transistor as well as a standard board control type. This axis drive operates with a peak current of 10.4 A, rated current of 5.8 A, and supports 3-phase 400 V AC/DC supply. With enclosure rated at IP20, it measures 250 mm in height, 90 mm in width, and 181 mm in depth.
Internal Product Review
The 10.F5.A1D-3A0A is a KEB F5 Combivert axis drive designed for 3-phase 400 V AC/DC systems. An integrated GTR7 braking transistor and IP20 enclosure make the unit well suited for controlled cabinet installations and dependable deceleration performance. Rated output at 5.8 A with 10.4 A peak current gives the drive a strong operating margin for demanding motion applications.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The 10.F5.A1D-3A0A axis drive is produced by KEB in the F5 Combivert Axis Drives series. It is an inverter that converts fixed mains power into variable voltage and frequency output for precise motor control in automated conveyors, packaging stations, and multi-axis machines. The product fits into the modular platform with a standard control board and an internal braking transistor to handle regenerated energy during rapid deceleration. By coordinating with a PLC over discrete or analog signals, it maintains commanded speed and torque at the connected motor. It is suited for applications where repeatable acceleration and deceleration are needed across frequent start-stop cycles.
The drive connects to a 400 V AC/DC supply and is designed for three-phase operation, which helps balance line currents. Under continuous load, it delivers 5.8 A, while brief overloads can rise to 10.4 A before protective limits respond. Hardware protection trips at 216% of rated current, and a short-time ceiling of 180% helps protect the power stage during brief overloads. A GTR7 braking transistor shunts regenerated energy to an internal resistor during deceleration. The standard board accepts command references, but this variant has no encoder interface, so speed is regulated without motor feedback. Cooling is handled by a varnished heat sink with vertical airflow inside the cabinet.
Physical format is set by inverter size code 10, giving a face width of 90 mm, a height of 250 mm, and a depth of 181 mm. The enclosure is rated IP20, which suits installation in closed control panels where the cabinet provides additional protection. The power stage can drive motors up to 3 HP, matching common auxiliary axes in assembly cells and similar automated equipment. The varnished cooling assembly helps resist moisture films on exposed surfaces. Its slim front dimensions help conserve panel space when several drives are mounted in the same enclosure, and the simplified signal set can reduce cable routing complexity inside compact control cabinets.
