10.F5.A1D-2B-A KEB
Wake Industrial LLC is not an authorized distributor of this product.
The KEB 10.F5.A1D-2B-A is part of the F5 Combivert Axis Drives series and features a standard control board with an IP20 enclosure. The drive has a maximum output current of 18 Amps, supports input supply of 1- or 3-phase 230 V AC within a range of 180 to 260 V AC, and can control up to 3 horsepower motors. It includes two encoder inputs, a carrier frequency of 16 kHz, and an installed braking transistor.
Internal Product Review
The 10.F5.A1D-2B-A is a KEB F5 Combivert axis drive with an IP20 enclosure and EMC Class C1 compliance. A 250 µs fast torque setpoint and 1 ms I/O scan time give the drive impressively responsive control behavior. A 10 A rated output current and integrated braking transistor make this model a strong choice for compact motion applications.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The 10.F5.A1D-2B-A axis drive is produced by KEB and belongs to the F5 Combivert Axis Drives series. In automated production lines, the drive modulates AC power so that three-phase induction or servo motors follow torque and speed commands generated by higher-level controllers. Its integrated power electronics and embedded control software provide motion control for conveyors, pumps, and small handling stations. The compact design allows the unit to regulate motor operation without requiring a separate external power stage. It can support speed-regulated processes and positioning tasks in machinery with moderate power requirements.
The power section accepts a single-phase or three-phase 230 V AC supply and remains stable across an input range of 180–260 V AC. A braking transistor is factory-installed to divert regenerated energy during rapid deceleration, and inverter size code 10 indicates the mechanical frame used by the unit. The drive delivers a rated output current of 10 A and can reach 18 A for short intervals, providing additional current for acceleration demands. Its general motor limit is 3 HP, making it suitable for small motors used in material handling and process equipment. The carrier switching frequency is 16 kHz, which helps reduce audible motor noise during operation. The drive meets EMC Class C1 emission limits when installed with the recommended filters, supporting use in residential and light-industrial settings.
A standard control board handles command processing and provides two differential encoder inputs with 32-bit position resolution. The encoder inputs count pulse streams up to 500 Hz without overrun, allowing the drive to track connected feedback devices. Torque references pass through the control software in a cycle time of 250 µs, while the application I/O refreshes every 1 ms to coordinate with PLC scan intervals. The housing has an IP20 rating and is intended for installation inside a protected control panel. Ambient operation is permitted from -10 to 45 °C, while storage is permitted between -25 and 70 °C. The fast internal response supports precision indexing and regulated-speed applications that require frequent command updates.
