10.56.200-B129 KEB
Wake Industrial LLC is not an authorized distributor of this product.
The KEB 10.56.200-B129 is an axis drive from the F5 Combivert Axis Drives series with a rated power of 4 kVA and supports motors with up to 3 horsepower. This unit measures 298 mm in height, 248 mm in width, and 182 mm in depth, and has a protection rating of IP00. It features a UVW encoder interface and a TTL auxiliary signal output, with a rated current of 10 amps.
Internal Product Review
The 10.56.200-B129 is a KEB F5 Combivert axis drive with 10 A rated current and 4 kVA rated power. UVW encoder interface and TTL auxiliary signal output support accurate feedback processing and clean integration in motion-control systems. IP00 protection makes the drive a strong choice for enclosed industrial installations.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The 10.56.200-B129 is an inverter module manufactured by KEB for the F5 Combivert Axis Drives series. Within a multi-axis automation cabinet, it converts three-phase mains power into controlled pulse patterns for induction or synchronous motors, allowing closed-loop speed and torque regulation in conveyors, gantries, and packaging equipment. The model uses housing size code 10, giving it a compact form that is suitable for installations with several coordinated axes.
An auxiliary signal output operating at the TTL level provides clean logic pulses for external counters or controllers. The drive supports motors up to 3 HP. Its power section accepts mains frequencies of 50/60 Hz without derating under the stated operating conditions. Under nominal conditions, the output bridge delivers a continuous current of 10 A, and the power channel has a throughput rating of 4 kVA. A 25 A mains fuse protects the input rectifier from excessive fault current. The three-phase output voltage can be adjusted from 0 V up to the mains voltage, allowing the control board to vary motor terminal voltage in proportion to frequency and maintain the required V/Hz ratio. Position signals enter through the UVW encoder interface, allowing the drive to read absolute rotor position without an additional interface card.
The open-frame unit has a protection rating of IP00, so it must be installed inside a properly ventilated enclosure and protected from conductive dust and accidental contact. Operation is permitted at altitudes up to 3000 m, although reduced air density at higher elevations can affect heat dissipation. The chassis weighs 5.0 kg, and its compact depth of 182 mm helps conserve cabinet space when multiple axes are installed together. Mounting holes with a diameter of 7.2 mm secure the unit to a back panel, while 50 mm of side clearance and 100 mm of top clearance maintain airflow around the heat sink and bus capacitors.
