10.56.200-A349 KEB
Wake Industrial LLC is not an authorized distributor of this product.
The KEB 10.56.200-A349 is a drive from the F5 Combivert Axis Drives series with a rated mains frequency of 50/60 Hz and a 200 V AC voltage class. It provides a rated output current of 10 Amps, supports a maximum motor power of 3 HP, and operates with a protection level of IP00. The drive is designed for use at site altitudes up to 3000 meters and can handle temperatures ranging from -10 °C to 45 °C during operation.
Internal Product Review
The 10.56.200-A349 is a KEB F5 Combivert axis drive built for 200 V AC systems with a 10 A rated output current. UVW encoder interface and TTL auxiliary signal output support clean feedback integration in motion-control cabinets. A 200% overload capability for less than 30 seconds makes this drive a very capable choice for demanding axis applications.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The 10.56.200-A349 is a variable-frequency inverter manufactured by KEB and supplied within the F5 Combivert Axis Drives series. It modulates three-phase motor voltage and frequency so that machine builders can execute speed, torque, and positioning tasks without mechanical throttling. By accepting feedback through its UVW encoder interface and providing TTL auxiliary signals, the unit forms the core of closed-loop motion modules found in packaging lines, material-handling systems, and automation cells.
The inverter operates on a mains supply rated at 200 V AC and delivers an apparent power output of 4 kVA to the motor terminals through three output phases. Under continuous duty, the current is limited to 10 A, but the design supports short-term loading of up to 200% for less than 30 seconds, allowing rapid acceleration of inertial loads. Internal control algorithms remain synchronized with plant supplies operating at either 50 or 60 hertz, as indicated by the rated mains frequency of 50/60 Hz. These electrical limits establish the compatible motor frame sizes and require conductors with a cross-sectional area of at least 4 mm². Natural convection maintains the thermal profile when the unit is installed in an open control cabinet with adequate airflow.
Protective coordination requires a line fuse rated no higher than 25 A, safeguarding both the semiconductor bridge and connected conductors. The inverter supports a motor rated up to 3 HP. It can operate at elevations reaching 3000 m above sea level, provided the ambient temperature remains between -10 °C and 45 °C and the relative humidity does not exceed 95% without condensation. The open chassis has an IP00 protection rating, so installation inside an enclosed panel is required to shield live parts from contact and airborne contaminants. Storage temperatures may range from -25 °C to 70 °C, permitting transportation or warehousing without active climate control.
