Product Description:

The 10.F5.HDD-Z00A is an axis drive module produced by KEB within the F5 Combivert Axis Drives series. Acting as a variable-frequency inverter, it forms the interface between facility mains and a three-phase motor, converting electrical energy and coordinating motion in multi-axis equipment. In automated lines, the unit regulates speed, torque, and positioning so that conveyors, assembly stations, and packaging cells follow the instructions issued by a central controller.

To support precise control loops, the drive accepts two analog command channels that are sampled at 12-bit resolution, allowing 4,096 discrete reference levels. 8 digital inputs provide deterministic state changes, and each input is energized through the 24 V DC control supply that powers the logic board. Process data reach the microcontroller every 1 ms, so setpoint changes or fault messages are processed without perceptible delay. An IP20 protection rating indicates finger-safe openings and makes the unit suitable for cabinet mounting where no direct liquid exposure occurs. These interface and protection figures let the drive link to sensors, limit switches, and supervisory devices while maintaining electrical isolation.

For feedback and actuation, the inverter provides two analog outputs with a precision of 11-bit, permitting detailed status or torque feedback to external controllers. Two mechanical relays can switch auxiliary loads, and each pole is rated at 30 VDC / 1 A, making them suitable for interlocks or contactor coils. When higher-speed signaling is required, two transistor outputs share a budget of 50 mA total, which is sufficient for LEDs or optocoupler inputs. The power section handles motors up to 3 HP and pairs with installation spaces identified by inverter size code 10. A 230 V AC or DC mains connection allows the drive to fit a range of existing power arrangements without additional transformers.