10.F5.G1D-3A0A KEB
Wake Industrial LLC is not an authorized distributor of this product.
The KEB 10.F5.G1D-3A0A is part of the F5 Combivert Axis Drives series and supports open loop flux vector control with an optional closed loop. It accepts a 3-phase 400 V AC/DC input supply, features one analog and five digital inputs, and has an 11-bit analog input resolution. The drive measures 191 mm in height, 76 mm in width, and 144 mm in depth, and supports a maximum motor power of 3 HP.
Internal Product Review
The 10.F5.G1D-3A0A is a KEB F5 Combivert axis drive designed for 3-phase 400 V AC/DC input and open loop flux vector control with optional closed loop capability. An incremental encoder interface with a 300 kHz input limit supports accurate speed feedback. A built-in braking transistor adds practical motion control value, and the 3 HP motor rating makes the drive a strong fit for compact industrial axes.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The 10.F5.G1D-3A0A axis drive is manufactured by KEB and belongs to the F5 Combivert Axis Drives series. It converts fixed-frequency mains energy into a controlled output waveform so that a single motor axis can be started, stopped, and regulated from the drive cabinet. Designed for industrial automation, the unit coordinates with higher-level PLC commands and supports application software for pump, fan, and positioning tasks while fitting into densely populated control panels.
Signal processing resources on the drive include one analog input with an effective resolution of 11 bits and five programmable digital inputs. The digital inputs allow quick reference selection and enable functions, and their states are latched during each processing cycle. Feedback can be attached through an incremental encoder port that accepts pulse streams up to 300 kHz, while the built-in line termination has a resistance of 150 ohms to preserve signal integrity. A cyclic I/O update time of 1 ms supports the open-loop flux-vector algorithm and the optional closed-loop mode, providing consistent torque response. The auxiliary electronics can be powered from an external 24 V supply. A factory-installed braking transistor dissipates regenerated energy during rapid deceleration.
Power enters through a three-phase 400 V AC/DC input, and the inverter supports motors rated up to 3 HP for continuous operation. Overcurrent protection trips at 150 percent of the nominal current, while short-term acceleration demand can reach 125 percent of the nominal current. The output carrier frequency is 4 kHz, and heat is removed through a standard convection cooling path. The inverter has a size code of 10, a width of 76 mm, a depth of 144 mm, and a height of 191 mm. These dimensions allow the unit to be stacked with suitable clearance inside IEC control cabinets.
