Product Description:

The 10.F5.A1D-KBPB is an axis drive module manufactured by KEB for the F5 Combivert Axis Drives series. In industrial automation, this unit functions as the power and control stage between a motion controller and a three-phase motor, allowing the process to vary speed and torque while monitoring feedback through an incremental TTL encoder interface. A standard control board is fitted, and the drive relies on an external low-voltage supply to keep logic circuits active even when the main inverter bus is de-energized. This arrangement helps keep control functions available during controlled stops and temporary loss of main bus power.

The control section offers a single analog channel with an input resolution of 11-bit. This resolution allows more precise interpretation of the reference voltage used to set motor speed. The digital command lines use PNP logic, so an input must be pulled high to register an active state. Motion sequences can be triggered through 5 discrete inputs, and status reporting is handled by two outputs that can source a combined load of 50 mA total. System relays, sensors, and the onboard electronics share an isolated logic feed of 24 V DC, which simplifies cabinet wiring and helps separate field devices from fault currents.

Rapid signal capture is supported by an analog scan time of 250 ms, and the built-in sample-and-hold circuit helps stabilize regulation when the reference changes quickly. The inverter frame coded as size 10 is dimensioned for up to 3 HP of motor power, making the module suitable for small conveyors, indexers, or auxiliary axes. A factory-installed braking transistor allows regenerative energy to be routed to an external resistor, which helps prevent DC-bus overvoltage during deceleration. All power, logic, and encoder conductors land on pluggable terminals, and the complete set of connections totals 17 positions for organized wiring. The terminal layout also helps keep cable routing clear in compact control cabinets.