Product Description:

The 10.F5.A1D-3AGA is an axis inverter produced by KEB for the F5 Combivert Axis Drives series, intended to regulate induction or servo motors in coordinated production lines. It is built around a Standard Board control core and uses the series’ Size Code 10 power stage housed in the compact Type D frame. A Standard cooling path moves cabinet air across the heat sink, making additional fans unnecessary during normal operation when the cabinet provides suitable airflow. In multi-axis installations, the unit acts as the motor side of a DC link, translating the common bus into phase-controlled output for precise speed control, torque regulation, and synchronized axis response.

The drive is fed from a three-phase 400 V AC/DC supply and delivers a continuous output of 5.8 A while operating at a carrier frequency of 8 kHz. This switching frequency influences PWM resolution, audible noise, and thermal loading in the power stage. For acceleration or shock loads, it can source a peak of 10.4 A for 30 seconds before the electronically monitored 216% overcurrent trip intervenes to protect the semiconductors. Internal measurement channels are matched to the Standard Board, allowing vector, V/Hz, or servo algorithms without any hardware change for the selected control mode.

Mechanical integration is simplified by the IP20 open-chassis enclosure that fits inside sealed panels and supports panel-based installation. The Inc Input / Inc Input encoder interface accepts dual incremental feedback streams for speed and position loops, which is useful where the control system relies on direct motion feedback. The built-in braking transistor reduces DC bus overvoltage during overrun and supports rapid deceleration with an external resistor. With a general maximum motor power of 3 HP, the inverter suits conveyors, indexing tables, and small extruders.