09.F5.C1B-LA0A KEB
Wake Industrial LLC is not an authorized distributor of this product.
The 09.F5.C1B-LA0A is an axis drive produced by KEB and is part of the F5 Combivert Axis Drives series. It has 8 digital inputs, 2 digital outputs, and 2 analog inputs and outputs with 12-bit resolution. The drive features a braking transistor, IP20 enclosure, and has a 2 millisecond I/O scan time.
Internal Product Review
The 09.F5.C1B-LA0A is a KEB Combivert F5 axis drive with an IP20 enclosure and 24 V DC internal supply. From a controls standpoint, 2 ms I/O scan time and PNP/NPN terminal logic support responsive integration across mixed machine architectures. Strong signal handling through 2 analog inputs and 12-bit resolution makes the unit a very capable choice for precise axis applications.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The 09.F5.C1B-LA0A is a single-axis variable-speed drive manufactured by KEB for its F5 Combivert Axis Drives series. Intended for cabinet installation in factory automation, the device converts three-phase mains energy into regulated motor voltage and current, letting PLCs issue speed or torque references for conveyors, extruders, or positioning tables that demand repeatable motion under changing loads. Its integrated control terminals simplify wiring to sensors and actuators.
Five local I/O features support the drive’s control response. There are 2 analog inputs that accept ±10 V or 0–20 mA signals for speed, torque, or set-point references, and they are complemented by 8 digital inputs for start, enable, or limit switches that need millisecond reaction. The analog section is processed with a 12-bit resolution, giving 4096 discrete levels so the controller can fine-tune motor voltage without perceptible steps. Hardware sampling is synchronized by a 2 ms scan time; this deterministic cycle means logic updates, scaling, and drive modulation occur within the same time window, which is important for multi-axis coordination. All low-power electronics are supported by a dedicated 24 V DC internal supply, so field devices remain energized even when the main converter section is isolated for safety or maintenance.
Peripheral hardware is handled through the GTR7 braking chopper, which routes regenerative energy to the built-in braking transistor during rapid deceleration. Panel space is minimized because the housing carries an IP20 enclosure; this rating is sufficient for dust-free cabinets while allowing natural airflow over the heat sink. Wiring flexibility is provided by 29 control terminals that support both PNP and NPN logic, and high-speed status signals can be sourced through an open-collector block rated at 50 mA, enabling direct connection to indicator lamps or relay coils without external amplification.
