09.F5.A1A-3D2F KEB
Wake Industrial LLC is not an authorized distributor of this product.
The KEB 09.F5.A1A-3D2F is part of the F5 Combivert Axis Drives series and features an input rated voltage of 400 V AC with three input phases. It is equipped with one analog input, one analog output, five digital inputs, and two transistor outputs. The drive provides an IP20 enclosure, a Hiperface encoder interface, and a maximum motor power of 1.5 kW.
Internal Product Review
The 09.F5.A1A-3D2F is a KEB Combivert F5 axis drive with 400 V AC three-phase input for dependable motion control. An IP20 enclosure and an integrated braking transistor support clean cabinet installation and effective deceleration control. The Hiperface encoder interface improves feedback precision, and the 1.5 kW motor rating makes this unit a strong fit for compact servo applications.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The 09.F5.A1A-3D2F is an axis drive module manufactured by KEB for the F5 Combivert Axis Drives series. It serves as the intermediary power electronics that convert fixed-frequency mains into a variable voltage and frequency output, allowing closed-loop speed and torque control of a matched motor in industrial handling units, packaging equipment, or light machining centers. The design targets installations where compact form, integrated braking energy management, and straightforward field wiring are required.
The drive is fed by a three-phase supply at 400 V AC, and its protective housing is rated to IP20, so it must be mounted inside a switch cabinet with controlled airflow. For continuous operation, it can deliver an output current of 4.1 A. During rapid acceleration or regenerative events, it tolerates a short-time current of 8.2 A before thermal limits are reached. These current capacities support motors up to 1.5 kW, making the unit suitable for small conveyors or indexing tables. A factory-installed braking transistor dissipates excess DC-bus energy into an external resistor, protecting the drive when decelerating high-inertia loads. Compliance with EMC Class C1 enables installation in environments that require low conducted emissions on public power networks.
Command and feedback resources are arranged on the Standard control board. One analog input and one analog output support speed references or diagnostic signals, while five digital inputs can accept enable, direction, or limit commands. Two transistor outputs provide fast status flags, and the drive also offers 3 relay contacts for isolating ready or fault indications. Encoder feedback is processed through the Hiperface interface, allowing single-cable connection to modern servomotors. The auxiliary signal port drives external counters with a TTL level pulse train. Overall electromagnetic compliance makes the unit suitable for residential or light-industrial grids.
