09.F5.CDB-YW0A KEB
Wake Industrial LLC is not an authorized distributor of this product.
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
The KEB 09.F5.CDB-YW0A is part of the F5 Combivert Axis Drives series and operates with an input voltage of 400 V AC and a mains frequency of 50/60 Hz across three phases. It delivers a rated motor power of 1.5 kW, with a rated output current of 4.1 A and a rated output power of 2.8 kVA. The drive has a maximum switching frequency of 16 kHz and a maximum heat sink temperature of 90 degrees Celsius.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The 09.F5.CDB-YW0A is an AC drive in the F5 Combivert Axis Drives series engineered by KEB. Installed between a three-phase supply and an induction or synchronous motor, it modulates voltage and frequency so production lines, conveyors, or pumps can match commanded speeds without mechanical gear changes. By converting fixed mains power into a variable waveform, the unit supports efficient motion control in automation cells.
This model is designed for a three-phase input of 400 V AC at 50/60 ±2 Hz and can deliver an output frequency from 0 to 400 Hz. When loaded continuously, it supports a motor rated at 1.5 kW while supplying a phase current of 4.1 A. The internal IGBT bridge uses a normal 8 kHz carrier, balancing acoustic noise and switching loss. Operators can lower the carrier to reduce heat or raise it to smooth torque when the application requires it.
Dynamic events are accommodated by a peak bridge current of 7.5 A through the built-in braking chopper when an external resistor of at least 120 Ω is installed. Thermal integrity is guarded by a heat-sink sensor that trips at a maximum of 90 °C, while electronic protection opens the inverter at an overcurrent threshold of 8.9 A. For short overloads, the drive can sustain higher current for a few seconds, and continuous service is permitted from -10 °C to 45 °C.
Wake Industrial stocks this drive and offers same-day shipping. Each purchase includes a 1-year warranty. The chat tool available on the website answers questions.
Frequently Asked Questions about 09.F5.CDB-YW0A:
Q: What input voltage is required for the 09.F5.CDB-YW0A drive?
A: The KEB 09.F5.CDB-YW0A supports an input voltage of 400 V AC for operation.
Q: What is the rated motor power of the 09.F5.CDB-YW0A axis drive?
A: This drive is rated to deliver a motor power of 1.5 kW.
Q: What output frequency range does the 09.F5.CDB-YW0A axis drive provide?
A: It offers an output frequency range from 0 to 400 Hz.
Q: What is the maximum heat sink temperature for the KEB 09.F5.CDB-YW0A?
A: The maximum allowable heat sink temperature for this drive is 90 °C.
Q: What is the minimum braking resistor value required for the 09.F5.CDB-YW0A?
A: A minimum braking resistor of 120 Ω must be used with this drive.
