Product Description:

The 09.F5.A3D-Y080 is an axis drive module manufactured by KEB for the F5 Combivert Axis Drives series. In an automation cell, the unit converts a fixed mains supply into a variable three-phase output so induction or synchronous motors can be started, stopped, and regulated with precise ramp profiles. It suits multi-axis machinery where coordinated motion and compact cabinet placement are required. Its function is to provide controlled voltage and frequency so connected axes respond predictably during acceleration, steady operation, and braking.

In its default configuration, the drive is equipped with a Standard Board control layer that offers parameter menus and fieldbus gateways, and the thermal design uses standard cooling so only natural cabinet airflow is required. The control section supports local parameter access and can be paired with communication options that match the machine network. An integrated EMC filter and the GTR7 brake chopper are factory-installed, allowing direct compliance with conducted emission limits and rapid energy dissipation during deceleration. Under continuous duty, the inverter delivers 1.5 kW at 4.1 A output current from a 400 V AC or DC supply. Pulse patterns are generated at 2 kHz, and overcurrent protection is triggered once phase demand reaches 6.15 A.

Housing type D has a width of 90 mm, a 221 mm depth, and a 285 mm height, so the drive fits standard 300 mm deep panels while leaving clearance for cable bends. Momentary overloads can be supplied at 5.13 A, giving extra torque for acceleration without exceeding semiconductor limits. The unit is shipped with a braking transistor and EMI filter already wired, while no encoder feedback card is installed, allowing the required option for resolver, incremental, or absolute sensors to be added. The enclosure has an IP20 rating for installation inside a closed electrical cabinet.