Product Description:

The 07.F5.E1D-2B0A is an axis drive manufactured by KEB for the F5 Combivert Axis Drives series. It forms the power stage between the plant supply and a synchronous motor, modulating voltage and frequency so industrial controllers can position equipment or regulate motion without mechanical throttling. By integrating current processing, fault detection, and field-oriented control, the device provides closed-loop precision for automated conveyors, packaging cells, and coordinated multi-axis machinery.

The drive accepts a single-phase or three-phase 230 V AC/DC supply, allowing connection in control cabinets that use the same voltage rail. Regulation operates in sensorless closed-loop mode, which estimates rotor position from motor electromotive force rather than relying on a physical encoder. This arrangement simplifies wiring while maintaining responsive torque control at low speeds. Internal IGBTs switch at 16 kHz, reducing audible noise and improving current resolution. The overcurrent trip threshold is 216% of the rated output, while the power stage can sustain a short-term current of 180% of the rated output during rapid acceleration. A standard varnished cooling channel directs cabinet airflow across the heat sink. Two digital outputs and two relay contacts provide status and fault signals to the supervisory PLC.

The available connections include 2 analog outputs for process variables and 8 external digital inputs for enable, jog, and limit commands. The drive does not have an encoder interface, which reduces the amount of feedback wiring required inside the enclosure. Its housing measures 90 mm wide and 181 mm deep, while its height is 250 mm. These dimensions allow the unit to fit in densely populated control cabinets while leaving access to its power and signal terminals. A built-in braking transistor routes regenerated energy to an external resistor during motor deceleration. This function prevents excessive DC-link voltage when a connected load returns energy to the drive.