07.F5.CBB.YA53 KEB
Wake Industrial LLC is not an authorized distributor of this product.
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
The KEB 07.F5.CBB.YA53 is part of the F5 Combivert Axis Drives series and operates with an input supply of 400 V AC or AC/DC and an internal voltage supply of 24 V DC. It features 8 digital inputs, 2 digital outputs, 2 analog inputs, and 2 analog outputs, along with 2 relay outputs rated at 30 VDC and 1 amp. The drive uses convection cooling and has an I/O scan time of 2 milliseconds with a switching frequency of 8 kHz.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The 07.F5.CBB.YA53 is an axis drive module produced by KEB and placed within the F5 Combivert Axis Drives series. It functions as the closed-loop power stage that links a PLC or motion controller to an AC motor, regulating speed, torque, and positioning tasks in industrial automation lines such as conveyors, mixers, or winding stations. It is intended for coordinated machine motion where fast response and stable regulation are required during changing load conditions.
This drive accepts a main supply of 400 V AC or AC/DC, and that voltage range lets it connect directly to standard three-phase plant power without a step-down transformer. Eight discrete control channels are available through the front panel, so the unit provides 8 digital inputs for functions like start, fast-stop, or preset selection. Process variables such as tension or temperature can be fed in through 2 analog inputs, each of which is sampled alongside the digital channels inside an I/O cycle that lasts 2 ms; this short scan time minimizes latency between field events and drive response. Current protection is handled by an over-current trip that activates at 216 % of the continuous rating, preventing device damage during faults while allowing brief dynamic peaks needed for acceleration. Two analog outputs, two relay contacts, and two digital outputs mirror status back to the controller or field devices.
During load transients the inverter can sustain 180 % of nominal current for a limited duration, delivering the torque reserve required to overcome inertia without oversizing the motor. Its carrier frequency of 8 kHz keeps audible noise low and smooths motor current, yet still stays within IGBT thermal limits when combined with the drive’s convection cooling and Housing Type B mechanical frame. Field wiring is simplified by 29 terminals that group power, I/O, and communications on a single level. An external 24 V supply can hold logic circuits active during mains shutdown, preserving network communication and enabling controlled restart sequences.
