07.F5.CBB-YA50 KEB
Wake Industrial LLC is not an authorized distributor of this product.
The KEB 07.F5.CBB-YA50 belongs to the F5 Combivert Axis Drives series and operates with a supply voltage of 400 V and a switching frequency of 8 kHz. This drive supports a standard cooling type and features D-Sub 15-pole resolver and D-Sub 9-pole SSI input encoder connections. It provides a max short-time current of 180 percent and an oc-tripping current of 216 percent of rated current.
Internal Product Review
The 07.F5.CBB-YA50 is a KEB Combivert F5 axis drive designed for 400 V systems with an 8 kHz switching frequency. Resolver feedback and SSI input capability make the interface package especially useful for precise, adaptable motion control setups. A strong choice for axis applications requiring clean integration and consistent drive response.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The 07.F5.CBB-YA50 is an axis drive module manufactured by KEB as part of the F5 Combivert Axis Drives series. It converts fixed mains power into a controlled three-phase output that regulates motor speed, torque, and position in automated material handling, printing, and process lines. By running closed-loop vector algorithms and supporting dual encoder inputs, the unit serves as the drive interface between a PLC motion command and the mechanical load, enabling precise profile execution and coordinated multi-axis operation.
Its power stage is designed for a line supply of 400 V, and the insulated-gate output transistors switch at 8 kHz, a frequency that balances low audible noise with acceptable semiconductor losses. For transient load demands, the inverter can deliver up to 180% rated current for a short duration, allowing rapid acceleration or deceleration without saturation. Protective logic trips the drive when the output current reaches 216% rated current, preventing device or motor damage under fault conditions. Thermal energy is removed through a standard cooling arrangement that uses the integral heat sink and cabinet airflow instead of liquid or forced-air options.
The feedback section supports two independent channels. Motor-side position data can be cabled through a D-Sub 15-pole connector that mates with a primary resolver, providing noise-immune analog sine-cosine signals for high-temperature environments. A secondary interface uses a D-Sub 9-pole connector for an incremental or absolute sensor with SSI input, enabling synchronous acquisition of multi-turn position values. Because the unit ships without an encoder feedback card, an expansion option can be added only when additional feedback formats are required. This keeps the base configuration focused on the installed interfaces and preserves panel space.
