Product Description:

The 07.F5.B0A-UK04 axis drive module is manufactured by KEB and belongs to the F5 Combivert Axis Drives series. Installed in a control cabinet, it converts fixed-frequency mains power into a variable frequency and voltage output, letting automation controllers regulate motor speed and torque with closed-loop precision. By pairing with feedback devices it acts as the primary actuator in conveyors, pick-and-place stations, and other motion axes that require coordinated profiling. That control behavior helps maintain smooth acceleration, stable low-speed rotation, and repeatable positioning in compact machine axes.

Incoming power requirements start with a nominal line voltage of 260 VAC; this supply level is rectified and fed to the drive’s DC link. Under that supply, the converter draws up to 8.2 A, a figure useful for feeder circuit sizing and thermal estimates. The inverter stage can deliver an apparent power of 1.6 kVA, translating to a continuous output current of 4.0 A for the connected motor. A maximum output frequency of 1600 Hz supports spindles and high-pole machines beyond 60 Hz. An internal trip threshold protects the output bridge from sustained overloads, while the lack of an integrated braking transistor means external dissipation hardware is needed for regenerative cycles.

Mechanical form factor is fixed by the 76 × 191 × 144 mm housing coded as type A, and with wiring space included the assembly weighs only 1.1 kg, easing installation on DIN rail or back-plate brackets. Continuous operation is permitted as long as the heat-sink surface stays below 95 °C; above this point the drive will derate or shut down to protect power semiconductors. The module supports motors up to 0.75 kW, matching small pumps, fans, or axis actuators where energy demand is moderate. An enclosure rating of IP20 limits use to clean, nonconductive cabinet spaces, and temperature monitoring must be provided by external sensors when that function is required.