07.F5.B0A-P003 KEB
Wake Industrial LLC is not an authorized distributor of this product.
The KEB 07.F5.B0A-P003 is part of the F5 Combivert Axis Drives series and uses a 230V, 3-phase input with a supply voltage range of 180 to 260V AC. This drive features a rated output current of 4.0 Amps, a maximum output frequency of 1600 Hz, and supports 2/4-pole motors with a motor power of 0.75 kW. Its apparent power is 1.6 kVA and it has an IP20 protection class.
Internal Product Review
The 07.F5.B0A-P003 is a KEB F5 Combivert axis drive with basic control. A 230 V three-phase input and 4.0 A rated output current support stable performance in light-duty motion applications. The 1600 Hz maximum output frequency stands out as a strong advantage for precise high-speed control.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The 07.F5.B0A-P003 is an AC variable-frequency drive produced by KEB as part of the F5 Combivert Axis Drives series. Intended for cabinet installation, the unit converts fixed mains power into a programmable three-phase output that governs motor speed and torque in automated conveyor, packaging, and fluid-handling stations. Its basic control platform offers scalar and simple vector modes suitable for standard induction motors, allowing machine builders to achieve closed-loop regulation without relying on mechanical gearboxes or complex servo hardware.
Electrical limits indicate where the unit can operate safely. Its apparent power capacity is 1.6 kVA, indicating the total volt-ampere demand the upstream supply must deliver under full load. The drive supplies a continuous phase current of 4.0 A, setting the thermal boundary for connected motor windings. A top carrier arrangement allows the controller to reach an output frequency of 1600 Hz; such bandwidth supports high-speed spindles or sensorless vector control at elevated field-weakening speeds. The housing is built to the A format and carries a protection rating of IP20, so it must be mounted inside a control enclosure. For mechanical output, the inverter is sized for motors rated at 0.75 kW.
Input compatibility complements the output profile. The nominal supply is 230 V 3-phase, and the drive tolerates fluctuations within a 180–260 V AC window to accommodate lightly regulated plant grids. Line frequency acceptance of 50/60 Hz allows deployment on international mains without retuning. Internally programmed pole selection supports both 2-pole and 4-pole machines, letting an installer use standard IEC frames with a single inverter model. Because no accessory set is included, braking resistors, filters, or fieldbus cards are added only when the application requires them, keeping wiring and panel layout straightforward.
